What emergency and exit lighting is for
When normal power fails, or when smoke and panic make a building hard to read, people need to find the way out. Exit signs mark the path and the doors, and emergency lights provide enough illumination along that path to see steps, turns and obstacles. Together they make up the egress lighting system, and buildings that are open to the public, employees or residents are generally expected to maintain them.
The two parts do different jobs. An exit sign tells you where to go, and it stays lit in normal operation as well as during an outage. An emergency light is dark or dim in normal conditions and switches on when it senses loss of normal power, giving enough light to move safely. In many buildings the two are combined in one unit, with a sign on top and lamp heads on the sides.
Because the system exists for rare events, failure is invisible until it matters. A battery that no longer holds a charge looks identical to a good one. A sign with a dead lamp may sit unnoticed in a corridor for months. The only way to know the system works is to test it on a schedule and to repair what the test finds.

How the equipment works
A typical self-contained emergency unit holds a rechargeable battery, a charger, a sensing circuit and one or more lamp heads. In normal operation the charger keeps the battery topped up and the sensing circuit watches the incoming power. When power drops, the unit switches to battery and lights the lamps. When power returns, it switches back and recharges. A test button or a small indicator light lets you see that the unit is alive.
Exit signs follow a similar pattern. Many are LED signs with a built-in battery, so they stay lit during an outage. Others are connected to a central battery system or a generator. Older signs may use fluorescent or incandescent lamps, which fail more often and use more energy. Some signs are photoluminescent, glowing without electricity, and have their own rules for where they may be used.
Larger buildings may use a central inverter or a generator with an automatic transfer switch to power the emergency lights from one location. These systems have more equipment to keep up, but fewer individual batteries to replace. The pages on automatic transfer switches and commercial generator hookup explain how the backup source fits in.
Common failures technicians find
Batteries are the number one cause of failure. They wear out with age and heat, and in South Florida's warm utility rooms and attics they wear out sooner. A unit with a dead battery may light fine on normal power and go dark the moment the power fails, which is a failure you only discover during a real outage or a proper test.
Other common problems include burned out lamps, failed chargers, tripped breakers feeding the units, loose or corroded wiring, units that were unplugged or switched off during construction and never restored, and signs that have been blocked by new ceilings, banners, shelving or decorations. Water leaks from roofs can damage units and fixtures, and humidity corrodes contacts.
A unit that chirps, shows a red or missing indicator light, flickers or does not light when tested needs attention. Do not assume that a silent unit is healthy. The page on lighting installation and repair covers fixture work more broadly, and the problem page on flickering lights explains why flicker is a sign to investigate and not ignore.
Testing: what is done and why
Testing has two layers. A short functional check, usually done regularly, confirms that each unit switches to battery and lights its lamps when its test button is pressed or its feed is interrupted. A longer duration test confirms that the battery can hold the lights for the full required period. Both are meant to be recorded, so that an inspector or insurer can see that the system has been maintained.
The rules about how often and how long to test come from fire and life-safety standards and local authorities, and they can vary by building type. Your local fire marshal or building department has the final word on what applies to your property. A technician can explain the general approach and perform the testing, but should not be asked to promise that a building satisfies every requirement without knowing what the authority expects.
Keep a simple log with the date, who tested, which units were checked, which failed and what was done. Mark failed units clearly so they are not forgotten. This log is often the first thing requested after an inspection or an incident, and a blank log invites trouble.
Replacement, battery changes and upgrades
When a unit fails, the choice is between replacing the battery and replacing the unit. Batteries are replaceable on most units, and a new battery restores function if the rest of the equipment is sound. If the unit is old, cracked, corroded or discontinued, a full replacement is often more sensible, since a new unit includes a fresh battery, charger and lamps.
Upgrades from older fluorescent or incandescent signs to LED units usually reduce maintenance, because LEDs last far longer and draw less power. When changing a sign, the technician should also check that the circuit feeding it is correct, that the sign is visible from where people need to see it and that the mounting is secure.
Replacement is also a chance to fix what testing exposed: missing units at corners, stair landings and exits, units mounted behind obstructions, and circuits that share a breaker with something that gets switched off. Where building changes have altered the exit paths, the emergency lighting should follow. The page on tenant improvement electrical work describes how build-outs change egress needs.
Placement, circuits and unswitched feeds
Where units go matters as much as whether they work. Emergency lights are expected at exits, along corridors, at changes of direction, in stairwells and in larger rooms where people may need to cross open floor. Exit signs belong over doors and at points where the path turns. When furniture, partitions or ceilings change, placement that was once correct can become wrong.
Emergency units are normally fed from a circuit that stays on, so the sensing circuit can detect when normal power is lost. If a unit is wired to a circuit that is switched off by a wall switch, a timer or a breaker that gets turned off at night, it will not sense a real outage and its battery will not charge reliably. This is a classic wiring mistake that is easy to miss.
A technician checks the feed to each unit, confirms that it is on an unswitched circuit that is labeled and notes any unit that shares a breaker with a load that is routinely turned off. Panel labeling helps here, and the page on panel labeling and circuit mapping explains how to mark the emergency lighting circuit clearly.
Hurricane season, outages and long power loss
A hurricane or a long outage is the real test. Battery units are designed to provide light for a limited period, not for days. After that time, the building may be dark. Property managers should plan for what happens when the batteries run out, including whether occupants should evacuate, whether temporary lighting is needed and whether a generator can keep critical lights on.
After a storm, check the emergency lighting before reoccupying a building. Batteries that have been drained need time to recharge, and units that were wet or damaged should be tested or replaced. If water reached a unit, its feed or its panel, do not reset breakers or restore power until the equipment has been checked. The guide on after-hurricane electrical safety describes the safe sequence.
For high-rise and multi-story buildings, the stakes are higher because people may be inside long after the power fails. The guide on high-rise electrical emergencies explains how electrical failures in tall buildings differ from those in a single-story property.
Which buildings need to pay attention
Nearly every building that people use at night or in unfamiliar surroundings needs emergency and exit lighting: apartment buildings, offices, restaurants, stores, hotels, medical offices, schools, churches, warehouses and parking garages. The details vary with building type and size, and the authority having jurisdiction decides what applies. Small, simple buildings may have only a few units, while a large building may have hundreds.
Property managers and association boards carry much of the responsibility. A lapsed testing program can cause trouble at a fire inspection, an insurance review or after an incident. Owners of small commercial spaces, particularly tenants who have moved into a space with existing equipment, should confirm who is responsible for maintaining the units, since a lease may assign it to either party.
See the pages on HOA and condo association electrical service, church and school facility electrical service and hotel and hospitality electrical service for how these building types usually handle it.
A walk-through example from a small office building
Consider a two-story office building with a front entrance, a rear exit, a central stair and a long corridor on each floor. A technician walking it with a clipboard might find the entrance exit sign lit and healthy, the rear exit sign dark because a lamp has burned out, and a stair landing emergency unit with a red indicator light that signals a battery fault. On the second floor, a new partition installed by a tenant has put an exit sign behind a wall, so no one in the new suite can see it.
The corridor lights tell another story. One emergency head is aimed at a ceiling tile after cleaning, and another unit is plugged into an outlet that is switched off at night, so it never charges. Each of these is a small fix, but together they leave the building with gaps that nobody noticed. None would be obvious on a normal day, and all would matter in a power failure.
The repair list that comes out of such a walk-through is practical: new lamps or LED retrofit for the dark sign, a battery for the landing unit, a relocated or additional sign in the new suite, re-aimed heads and a corrected feed for the switched unit. The technician records each unit and its condition so that the next test starts from a known baseline. This is the kind of record that satisfies an inspector and reassures an owner.
Working safely and what to have ready
Maintenance staff can safely press test buttons, note which units fail and keep exits clear. They should not open units, open ceiling panels near wiring or work on equipment connected to an energized circuit. Batteries contain stored energy even when the circuit is switched off, and wiring in ceilings may be live from circuits staff cannot see.
When you call, have the building address, the type of units, a count of how many have failed, whether the failure was found during a test or during an outage, and whether anything changed recently such as renovation or roof leaks. If an inspector or insurer has issued a list of deficiencies, have it on hand. Photos of unit labels are useful for ordering parts.
Ask about the service call charge, which is explained on the phone before dispatch. Quotes for repairs and replacements are given only by phone, and larger buildings need an on-site visit so the count and condition of equipment can be confirmed. When you are ready, call, describe what you are seeing and the next step will be explained.
Questions people ask
How do I know if my emergency lights actually work?
Press the test button or interrupt the feed to see if the unit switches to battery and lights its lamps. A longer duration test confirms the battery holds for the required time. Looking at the indicator light helps, but the only reliable way is a real test. Keep a written log of dates and results for inspections.
Why does my exit sign chirp or show a red light?
A chirp or an abnormal indicator usually means a battery or charger fault, a low battery or a unit that has lost its feed. Do not assume the sign will work in an outage. It needs checking, and often a new battery or replacement. A technician can test the unit and confirm whether the circuit feeding it is correct.
How often should emergency lighting be tested?
Life-safety standards call for regular short checks and a longer test of battery duration, recorded in a log, but exact intervals and requirements depend on the building type and local authority. Your fire marshal or building department has the final word. A technician can perform the testing and help you set up a simple routine.
Can I just replace the battery in an old emergency unit?
Sometimes. If the housing, charger and lamps are sound, a new battery restores function on many units. If the unit is old, cracked, corroded or discontinued, replacing the whole unit is often more sensible, since it comes with a fresh battery and charger. A technician can examine the unit and recommend the better course.
Does the circuit feeding an emergency light matter?
Yes. The unit needs to sense when normal power is lost, so it should be on an unswitched circuit that stays energized. If it shares a switch or a breaker that gets turned off at night, it may not charge or may not activate properly. Checking the feed is part of any thorough service visit.
How do I get a price to fix or replace exit lighting?
Quotes are given only by phone. A few units may be priced from a description, while a larger building or one with many failed units needs an on-site visit so the count and condition can be confirmed. The service call charge is explained on the phone before anyone is dispatched. Call and describe what you found.
For "Emergency and Exit Lighting Service", a phone call comes first. Describe the circuit, the breaker or the equipment, and we will talk through the safe next steps and whether the job needs an on-site look.
Related pages
- Parking Lighting: Parking lot and garage lighting service in South Florida: pole lights, garage fixtures, photocells, buried wiring faults and dark-lot complaints.
- Hotel Service: Electrical service for hotels and hospitality properties: guest-room outlet failures, common-area lighting and seasonal-peak maintenance planning.
- Preventive Maintenance: What a preventive electrical maintenance program covers for commercial properties: inspections, thermal checks, records and how managers plan visits.
- High-Rise Emergencies: What to do when power fails in a tower: elevator, common-area and unit-level outages, who to notify first, and how building management is involved.
- Lighting Installation &: South Florida lighting planning and troubleshooting for homes, condominiums, commercial spaces, exteriors and managed properties.
- Server Room Power: How small business server rooms and data closets get dedicated circuits, surge protection and cooling support, and what an electrician checks first.
Keeping a simple log so problems do not pile up
Emergency and exit lighting tends to be forgotten until an inspection or a power outage reveals which units no longer work. A simple written log solves most of that. It can be a spreadsheet or a clipboard by the electrical room, listing each fixture by location, the date it was last tested, and any note about its condition. The point is not paperwork for its own sake but a record that shows trends, such as the same corridor unit failing again and again after every battery change. Many owners find that a log also helps during insurance reviews and building inspections, since it shows that testing is a routine habit and not something that happens only when a problem forces it.
When a technician visits, the log gives a starting map. Units that were flagged previously can be checked first, and batteries that are approaching the end of their usual life can be replaced in one trip instead of several. The technician can also note fixtures that were moved, blocked by new shelving or covered during painting, which is a surprisingly frequent cause of exit signs that technically work but cannot be seen by someone walking toward them. Mention to the technician if a space has been reconfigured, because a new partition or a taller display can leave a once-visible exit sign hidden from the people who most need to see it.
What to keep is modest: the location, the test date, who performed it, and what was found. If you do not have a log yet, a first walk-through can create one, and it only needs to be updated when something changes. Maintenance staff can then follow the same routine every time. Call us to talk about how to set this up for your building, and the scope and any quote are explained before work begins. Assign one person to be responsible for the log, even if the work is shared, because a record with no owner tends to be forgotten within a few months and then fails when it is needed.
