Why triage helps
When something goes wrong electrically, people tend to react in one of two ways. Some panic and take risks, such as pouring water on a sparking outlet or reaching into a panel. Others wait too long because the problem seems small, until it is not. A simple triage framework sits between those extremes: act fast on real hazards, act calmly on everything else.
The framework used here is based on two questions. First, is there an immediate danger to people, such as fire, smoke, sparks, shock or standing water near live equipment? Second, if there is not, could the problem become dangerous if left, such as heat, burning smells, buzzing or repeated breaker trips? If the answer to the first is yes, it is an emergency. If the answer to the second is yes, it needs prompt attention. If neither, it can be scheduled.
This guide is general information, not a substitute for judgment. If you feel unsafe, trust that feeling, step away and call. We would always prefer you to call about something minor than to wait with something serious.

Group one: call 911 first
Some situations call for emergency services before an electrician. If there is visible fire, flames, heavy smoke or a smell of smoke you cannot trace, leave the building and call 911. If someone has been shocked and is unconscious, not breathing normally, burned or confused, call 911 and, if it is safe, switch off power at the main breaker or unplug the device without touching the person while they are still in contact with the source.
A downed power line touching a person, a vehicle, a fence or the ground near your home is also a 911 situation. Keep everyone far away, do not touch anything in contact with the line and do not drive over it. Our page on a power line down at the property explains what to do while waiting for responders and the utility.
Other 911 situations include a fire in an electrical panel or outlet, a strong smell of gas together with electrical problems, and flooding that reaches outlets and panels with occupants still inside. After a fire, our guide on steps after an electrical fire explains how to proceed once the scene is safe.
- Flames, heavy smoke or a smell of smoke you cannot trace
- A person shocked, burned, unconscious or not breathing normally
- A downed line on or near people, vehicles or the property
- Fire in a panel, outlet, appliance or meter box
- Water reaching energized equipment while people are inside
Group two: stop and call an electrician right away
This group has no flames, but the signs point to heat or a failing connection that could escalate. A burning smell from an outlet, switch or panel, scorch marks or melted plastic, sparks when plugging something in, a panel that buzzes or hums loudly, a breaker that will not reset or trips repeatedly, a meter box that is damaged or hanging and water inside a panel all belong here.
In these cases, stop using the affected circuit or area. If you can do so safely without touching the panel with wet hands, switch off the breaker for the affected circuit. If you cannot identify it, or the situation seems serious, switching off the main breaker is an option, but only if the panel is dry, nothing is smoldering and you are not standing in water. Then call.
Our pages on a burning smell from an outlet, sparks from an outlet, buzzing from the panel and water in the electrical panel explain each symptom in detail. All of them call for a prompt visit, not for a wait-and-see approach.
Group three: urgent but not dangerous right now
Some symptoms are worrying and inconvenient but are not an immediate hazard. Half the house without power, a single circuit that is dead, a ground fault outlet that will not reset, lights that flicker in one room and a loss of power to the air conditioner can often be handled by a prompt call and a visit, particularly if there is no heat, smell or noise.
These issues can still become dangerous, and they can be urgent for other reasons. Loss of cooling during a heat wave is a health risk. A dead circuit supplying a refrigerator or medical equipment is an urgent practical problem. A flickering light may be early warning of a loose connection. Treat them as soon-as-possible, and tell the dispatcher about vulnerable household members.
Our pages on half the house with no power, a GFCI that will not reset and lights flickering in the house explain common causes and what you can safely check yourself.
Group four: schedule a visit
Many electrical matters can be planned. A single outlet that does not work with no warmth or smell, a switch that feels loose, a bulb that burns out too often, a light that buzzes softly, a dimmer that hums, a chirping smoke alarm, a request to add outlets or a charger, a cosmetic repair after a renovation and a safety inspection before selling or after buying all fit.
Scheduling does not mean ignoring. Make a note of the symptom, avoid using the affected item if there is any doubt and keep an eye on it. If anything changes, such as new heat, smell, noise or tripping, move it up to group two. Our pages on an outlet that is not working, a buzzing dimmer and bulbs that burn out quickly describe likely causes.
Planned visits are usually calmer and more efficient. The technician can take time to look at related items, explain options and note things to watch. Quotes are given by phone, and complicated jobs need an on-site visit, so describing the work clearly helps the call go smoothly.
What to do safely while you decide
Whatever the group, a few actions help. Move people and pets away from the affected area. Do not touch damaged equipment, do not pour water on electrical fires and do not use anything metal near a panel or outlet. If a cord or appliance is involved and you can unplug it without touching anything damaged, do so. If you have a dry, accessible panel and know which breaker feeds the area, switching it off is reasonable.
If the panel itself is the problem, do not open it. Standing on dry footing, you can switch off the main breaker if nothing is burning and the panel is dry. Do not switch it back on until a qualified person has checked it. If water is present, do not approach the panel, and call the utility if the whole service needs to be disconnected.
Keep a phone charged, a flashlight handy and the house address ready. If power is out, avoid candles and never run a generator indoors. Our guide on building a power outage plan explains how to prepare for the hours when power is off.
Common symptoms and where they land
The table below places typical symptoms in their usual group. It is a guide, not a rule, and context can move a symptom up or down. When two symptoms occur together, such as a flickering light with a warm switch plate, take the higher group.
If you are unsure where a symptom belongs, call and describe it. A short conversation often settles it. Our guide on how to describe an electrical problem explains what to say so a technician can help quickly.
| Symptom | Usual group | First step |
|---|---|---|
| Flames or heavy smoke | Call 911 | Leave the building and call 911 |
| Burning smell at outlet or panel | Stop and call now | Switch off that circuit if safe, then call |
| Sparks when plugging in | Stop and call now | Stop using the outlet and call |
| Breaker will not reset | Stop and call now | Leave it off and call |
| Water in panel or meter box | Stop and call now | Do not touch, keep away, call |
| Half the house out | Urgent | Check main and breakers, then call |
| Ground fault outlet will not reset | Urgent | Unplug items, try once, then call |
| One dead outlet, no warmth | Schedule | Check breaker and ground fault buttons, then book |
| Buzzing dimmer or bulb | Schedule | Note when it happens and book |
Storms, flooding and lightning
South Florida's weather adds its own category of electrical emergencies. After a lightning strike, power may seem fine while hidden damage exists in wiring, devices and the panel. Burning smells, dead outlets, tripping breakers and failed electronics after a storm all deserve prompt attention. Our page on lightning strike electrical damage explains what to look for.
Flooding raises the stakes. Water in outlets, panels or wiring is a shock and fire hazard, and flood-affected equipment often must be replaced rather than dried. Never enter flooded areas with power on, and never wade through water that may be energized. Our guides on flooded home electrical safety and electrical safety after a hurricane explain the steps.
During regional emergencies, demand for electricians rises sharply and no dispatch time can be promised. Prioritizing is part of the work, which is why accurate information about hazards matters. Tell us about anyone with medical needs, any water, smoke or sparks and any damage to the meter or service equipment.
What happens when you call
When you call, we will ask where you are, what you see, hear and smell, whether anyone is hurt and whether water is involved. Based on your answers, we will tell you whether to call 911 first, what you can safely do while waiting and what the next step is. If a visit is needed, we will explain how it works, including the service call charge, before anyone is dispatched.
A technician will diagnose the cause, explain what is wrong in plain terms and describe options. Simple repairs may be quoted by phone, and complicated work needs an on-site visit and a plan. The technician will also tell you what to watch for afterward and when to call back.
Have a few things ready: the address, a description of the symptom, when it started, what was running at the time, whether the breaker tripped and any recent storm, renovation or new appliance. The more precisely you describe it, the faster we can sort it. When you are ready, call and tell us what is happening.
A short rule to remember
If you can see fire or smoke, or someone is hurt, call 911. If you can smell something hot, see scorch marks, hear buzzing or sparks or have a breaker that will not stay on, stop using it and call an electrician right away. If power is out in part of the home or one device will not work and nothing seems hot, call soon. If it is a minor annoyance, book a visit. And if you cannot decide, call and ask.
This rule will not cover every case, but it will keep you on the safe side of most of them. Electrical problems rarely improve on their own, and the ones that look small can hide a connection that is slowly heating. Acting early is nearly always easier, safer and less disruptive.
Our team would rather talk through a symptom that turns out to be minor than hear about a serious one that went unreported. Call whenever you are unsure, and we will help you sort it out.
Questions people ask
When should I call 911 instead of an electrician?
Call 911 for flames, heavy smoke, a person shocked or unconscious, a downed line near people or vehicles, or water reaching live equipment with people inside. Once everyone is safe and emergency responders have the scene, call an electrician for the repair. If you are unsure whether it is an emergency, treat it as one.
Is a burning smell from an outlet an emergency?
Treat it as urgent. A burning smell means something is overheating, and it can lead to fire. Stop using the outlet, switch off its breaker if you can do so safely, keep people away and call right away. If you see smoke, flames or sparks, leave the building and call 911 first.
Can I wait to fix a breaker that keeps tripping?
It is best not to wait. A breaker that trips repeatedly is reporting an overload or a fault. Do not keep resetting it or replace it with a larger one. Leave it off and call. If the tripping is accompanied by heat, noise or smells, treat it as an emergency and keep people away from the area.
What if only one outlet is dead?
That is usually a schedule-a-visit matter if there is no warmth, smell or sparking. Check whether a breaker or a ground fault outlet has tripped. If it resets and stays on, keep an eye on it. If it does not, or anything feels warm, stop using it and call sooner.
Should I turn off the main breaker in an emergency?
If nothing is on fire, the panel is dry and you are standing on dry footing, switching off the main breaker is a reasonable step to cut power. Do not touch a panel that is wet, smoking or smells burnt. Leave the building and call 911 in those cases. Do not turn it back on until a qualified person has checked it.
What should I have ready when I call?
Your address, a plain description of the symptom, when it started, what was running, whether a breaker tripped, and any storm, flooding or recent work. Say whether anyone depends on power for health reasons. We will tell you what to do safely while waiting and explain how the visit and service call charge work.
If "Is This an Electrical Emergency or Can It Wait?" sounds like your problem, call and describe what you see, hear or smell at the panel, the outlet or the fixture. We explain what the work involves, and some jobs need a visit before a quote.
Related pages
- Burning Smell: Smell burning near an outlet or panel? Immediate safety steps for the first minutes, what the smell usually means and what a technician checks.
- Outlet Sparks: A small flash when you plug in can be harmless, but continuous sparking is not. Learn how to tell them apart, what to do right away, and what to avoid.
- Breaker Won't Reset: A breaker that will not stay on may be reacting to a hard fault or may be worn out. Learn the difference, the safe checks, and why forcing it is a mistake.
- Describing the Problem: The details a dispatcher and technician need most when you call about an electrical problem: what you saw, heard, smelled and when it started.
- Water in Panel: Water inside an electrical panel is a serious hazard. Learn the common leak paths in South Florida, what to do right away, and how restoration works.
- After the Hurricane: Post-storm electrical hazards: damaged service equipment, flooded panels, generator misuse, and how to know when it is safe to restore power to a home.
Gathering the right facts so the call goes quickly
When something electrical goes wrong, adrenaline makes it hard to describe the problem. A little preparation helps. Think in terms of what you saw, heard, smelled, and touched, without touching anything dangerous. Did lights flicker or go out? Did a breaker trip and refuse to reset? Is there a hot smell, a buzzing sound, or discoloration around an outlet or panel? Which rooms are affected? These details let the person on the phone judge how serious the situation is and what questions to ask next. Ask whoever explains the work to put the key points in plain words, and do not hesitate to ask for them to be repeated.
Next, note what changed before the problem began. A storm, a new appliance, a recent renovation, an extension cord, or a neighbor's outage can all matter. Tell the office whether anyone has been hurt, whether any smoke or water is present, and whether you have already turned off the main breaker. Do not walk through standing water or open the panel to investigate. If you ever feel unsafe, leave the area and call emergency services first, because phone triage is no substitute for urgent help. If anything smells hot, looks scorched, or makes a buzzing sound, treat that as a reason to stop and call for help right away.
Have practical details nearby as well: your address, a gate code or access instructions, a good phone number, and a description of where the panel and meter are located. If you are a tenant or condo owner, know who manages the building. The office will explain what can be done and confirm availability before anything is promised, since no arrival time can be promised. Calling us with clear facts helps the conversation stay short and focused on getting the right help. If the situation changes before anyone arrives, such as a new smell or a spreading outage, update the office promptly.
