The general split between landlord and tenant
In most residential rentals, the property owner is responsible for keeping the building's fixed electrical system in safe working order. That includes the service panel, breakers, wiring inside walls, built-in outlets and switches, and fixtures that came with the unit. A tenant who finds a dead outlet in a bedroom or a breaker that will not stay on is usually describing a problem the owner is expected to address.
Tenants are typically responsible for using the system reasonably and for items they bring in themselves. Plugging in a space heater on an extension cord or overloading a power strip is different from a worn receptacle failing on its own. Damage that a tenant causes, whether through misuse or an unapproved modification, can become the tenant's responsibility under the lease.
The details come from three places: the lease, local rules and Florida's landlord and tenant law. This page describes common patterns and is not legal advice. If you are unsure of your rights or duties, read your lease, ask the property manager and consider speaking with a qualified attorney or a tenant or landlord resource in your county. For anything that looks dangerous, safety comes before paperwork.

What tenants should do first
If you notice something that could be a fire or shock hazard, such as a burning smell, scorch marks, sparks, a hot outlet cover or a buzzing panel, treat it as urgent. Stop using the affected outlet or appliance, and if it is safe to do so, switch off the circuit at the breaker. If there is smoke, flames or you feel unsafe, leave and call 911 before calling your landlord.
For routine problems, such as a dead outlet, a flickering light or a breaker that trips occasionally, report the issue promptly and in writing. Describe what is happening, where, when it started and what you have already tried. A short email or message through the property manager's portal creates a record with a date, which is better than a phone call alone.
Do not attempt electrical repairs on fixed wiring yourself. Replacing a light bulb or resetting a breaker once is reasonable. Opening outlets, replacing switches or working inside a panel is not appropriate for most tenants, can violate the lease and carries shock and fire risk. Our pages on outlets that do not work and breakers that keep tripping explain what is safe to check before you report.
How to document the problem
Good documentation helps everyone. Take clear photographs and short videos of the problem, including wide shots that show the location and close-ups of any damage, discoloration or labels. If a light flickers or an outlet buzzes, a short video with sound is more convincing than a description. Note the date and time on each item.
Keep a simple log. Write down when the problem first appeared, how often it happens, what else was running at the time and which rooms are affected. If you reported it, add the date, the person you contacted and how, such as email, text or portal. Save copies of all messages. If a technician visits, note the date, who came and what they said.
Documentation is also about protecting your belongings. If an electrical problem damages electronics or appliances, photographs of the equipment and receipts will support a claim under renters insurance. Keep failed items until your insurer says you can discard them, unless they pose a hazard. Do not overstate or guess at the cause. Report what you see, and let a qualified electrician determine why it is happening.
What landlords and property managers typically do
Owners and managers usually respond best to clear, specific reports. When one arrives, the first step is to decide how urgent it is. Anything involving heat, burning smells, sparks, exposed conductors, water near electrical equipment or no power to the whole unit is generally treated as urgent. Smaller issues, such as a dead outlet with no other symptoms, can usually be scheduled.
The owner or manager then arranges for a qualified electrician to inspect and repair. Calling a handyman for a panel or wiring problem is a risk, both because of safety and because unpermitted or improper work can create liability. A permitted electrical contractor can identify whether the problem is a worn device, a loose connection, an overloaded circuit or something deeper, and can pull a permit if the work requires one.
Landlords should communicate access times to the tenant according to the lease and local requirements, and should keep records of every repair, including what was found and what was done. Those records protect the owner if a dispute arises and help future technicians. If a repair will take time, a clear plan for interim safety, such as disconnecting an unsafe circuit, is better than leaving the tenant guessing.
Common situations and who usually handles them
This list shows tendencies, not rules. Leases differ, especially for single-family rentals where the tenant may be assigned certain duties, and for condos or townhomes where an association also has a role. If the problem touches shared equipment, the condo responsibility guide may be more relevant.
- A receptacle that is dead or loose in the wall: usually the owner's, since it is part of the fixed system.
- A breaker that trips repeatedly with normal use: usually the owner's, because it can indicate wiring, breaker or panel trouble.
- A light fixture that stopped working: a bulb change is typically the tenant's, while a failed fixture or switch is usually the owner's.
- A tripped breaker caused by a tenant's space heater or portable air conditioner: depends on the circumstances, and the lease may place responsibility on the tenant for misuse.
- Smoke detectors: batteries are often a tenant duty, while hardwired detectors and replacements are usually the owner's.
- Damage from a tenant's own modification, such as an unapproved outlet or a cut cable: usually the tenant's.
- Outages affecting the whole building: usually handled by the owner or management together with the utility.
Safety issues that should not wait
Certain symptoms deserve immediate attention no matter who is responsible. These include any burning or hot plastic smell near an outlet, switch or panel, a cover plate that feels warm, discoloration or scorch marks, sparks or popping sounds, a shock from an appliance or fixture, water in a panel or outlet, and a breaker that will not reset. Our pages on burning smells from outlets and sparks from outlets explain why these matter.
If you are a tenant and you cannot reach the owner or manager, take reasonable steps to stay safe. Stop using the affected circuit, keep people and pets away, and use the main breaker only if you can reach the panel safely and it is dry. Call 911 for fire or injury. Keep trying to reach the landlord and write down each attempt.
If you are a landlord, treat a safety report as a priority and show that you responded. A quick acknowledgment, a plan and a visit by a qualified electrician are the best protection for everyone. Delays on safety hazards are the situations most likely to result in injuries, property loss and disputes.
Permits, qualified workers and lasting repairs
Electrical work in a rental is subject to the same permit rules as any other property. Replacing a panel, adding circuits or doing substantial rewiring typically requires a permit and inspection, and the owner or the contractor pulls it. Cosmetic changes and simple like-for-like device replacement may not, but the rules vary by city and county. Our page on electrical permits in South Florida explains how this generally works.
Owners should use qualified electrical contractors and keep the paperwork. Unpermitted or poorly documented work can cause trouble during insurance renewals, sales and inspections, and it can make a future problem harder to diagnose. A tenant who sees work being done without a permit when one appears necessary can ask the owner about it, politely and in writing.
For recurring problems, a lasting repair is better than patching. If a breaker trips every week, the answer is not to keep resetting it. A technician can test the circuit, find whether there is overload, a loose connection or a failing device, and recommend whether the fix is a small repair or a larger project. A single visit that finds the real cause saves repeated calls.
Older rentals, extension cords and the load problem
Many South Florida rentals are older houses, duplexes and small apartment buildings with wiring sized for the appliances of decades ago. Modern tenants arrive with window air conditioners, space heaters during the rare cold snap, gaming computers, multiple televisions and cooking appliances, and the old circuits are asked to do more than they were designed for. A breaker that trips under those conditions is doing its job, and the lasting answer is usually a better circuit, not a bigger breaker.
Tenants should avoid running appliances from extension cords or stacked power strips for long periods, especially anything that produces heat. Cords hide heat damage, and the plug end is where problems often start. A warm plug or a cord that smells of hot plastic is a warning to stop using that arrangement. Our page on warm outlets and switch plates explains what the symptom can mean.
Landlords can reduce repeat calls by looking at the root cause. If a unit has few outlets, a tenant will use extension cords. If kitchen circuits are shared with other rooms, small appliances will trip the breaker. A technician can propose practical improvements, such as an added circuit or ground-fault protection in wet areas, and the owner can decide what fits the property.
Both sides benefit from a short written understanding of what appliances are acceptable, especially for portable air conditioners and heaters. When a lease is silent, a conversation before a problem occurs is better than a dispute after one.
Access, notice and being a good neighbor
Repairs require entry, and entry is governed by the lease and by law. Landlords generally need to give reasonable notice before entering a unit except in emergencies, and tenants should not unreasonably refuse access for needed repairs. Scheduling a window that works for both sides, and confirming it in writing, prevents misunderstandings.
Tenants can help repairs go smoothly by clearing access to panels and affected outlets, securing pets and letting the electrician know about any safety concerns. Panels in closets are often blocked by stored items, and the technician needs clear working space in front of them. Have a list of symptoms ready, including which rooms are affected and what was running when it happened.
In multi-unit buildings, an electrician may need to shut off power to several units briefly. Notice to neighbors is a courtesy that landlords and managers usually handle. If the work involves common equipment or an association, expect additional rules for access and insurance paperwork.
Getting help and getting a price
If you manage or own a rental, the simplest approach is to have a relationship with an electrical contractor before an emergency occurs. Tell them about the property type, the age of the wiring and the panel, and any past problems. During a call, describe the symptoms clearly and ask what you can safely do while you wait.
If you are a tenant, remember that the owner generally decides who works on the property, so send your report to them first. If the owner asks you to arrange the call, be ready to describe the problem, the address, access details and whether the owner has authorized the visit.
Prices are given by phone only, and complicated jobs need an on-site visit first. There is a service call charge, explained on the phone before anyone is dispatched. Whether you are the owner, the manager or the tenant, call and describe what is happening, and the office will explain the next step.
Questions people ask
Who pays when an outlet stops working in a rental?
In most cases the owner, since receptacles are part of the fixed electrical system. The lease and local rules govern the details, and damage caused by a tenant's misuse or unapproved changes can be treated differently. Report the problem in writing, document it with photographs, and avoid opening the outlet yourself.
Can a tenant hire their own electrician for repairs?
Usually only with the owner's permission. The owner is generally responsible for the building and may have preferred contractors or insurance requirements. A tenant who hires someone without approval could violate the lease or cause permit and liability problems. Ask the landlord in writing before arranging any work on fixed wiring.
What should I do if my landlord does not respond to an electrical hazard?
Keep yourself safe first: stop using the affected circuit and call 911 for fire or injury. Then keep a written record of every attempt to reach the landlord and the dates. For questions about your rights and remedies, consult your lease, local housing resources or a qualified attorney. Do not attempt repairs on fixed wiring yourself.
Is a tripping breaker a landlord problem or a tenant problem?
It depends on the cause. If it trips under normal use, it can indicate overloaded wiring, a failing breaker or a loose connection, which the owner usually addresses. If it trips because of a tenant's space heater or similar appliance on a weak circuit, the answer may differ. A technician can identify the cause.
Do I need a permit for electrical repairs in a rental?
Many repairs such as like-for-like device replacement do not require one, but panel changes, new circuits and substantial wiring work usually do. Rules vary by city and county. The contractor or owner normally pulls the permit, and keeping the final inspection record helps with insurance and future sales.
How do I get a price for rental electrical repairs?
Prices are given by phone only, and complicated jobs need an on-site visit first. There is a service call charge, explained on the phone before anyone is dispatched. Have the address, a description of the symptoms, who holds authority to approve the work and any access details ready when you call.
If "Electrical Repairs: Landlord or Tenant?" sounds like your problem, call and describe what you see, hear or smell at the panel, the outlet or the fixture. We explain what the work involves, and some jobs need a visit before a quote.
Related pages
- Condo Responsibility: Where a condo unit owner's electrical responsibility ends and the association's begins, from the unit panel to risers, meters and common equipment.
- Dead Outlet: A dead outlet may be a tripped GFCI, a tripped breaker or a failed connection. Learn which checks are safe and when to call an electrician.
- Breaker Tripping: A breaker that keeps tripping is telling you something. Learn the difference between overload, short circuit and ground fault, and why resetting is risky.
- Electrical Permits: How electrical permits and inspections generally work in Broward County and the cities from Boca Raton to North Miami, and what owners should expect from the process.
- Describing the Problem: The details a dispatcher and technician need most when you call about an electrical problem: what you saw, heard, smelled and when it started.
- Inspection Day: Get ready for rough and final electrical inspections: access, labeling, timing with open walls, and what inspectors typically look at on each visit.
Keeping repairs moving when two parties are involved
Electrical repairs in a rental involve two people with different information. The tenant sees the symptom, while the owner or manager knows the building's history and has the authority to hire. Smooth repairs usually come from sharing facts early. A tenant can send a short, dated message describing what happens, where, and how often, with photographs where possible. An owner can reply with a plan and say who will visit, rather than leaving the tenant to wonder whether anything is happening. Wherever uncertainty remains, a careful on-site look is worth more than any general advice found online or in print.
Access is a frequent source of friction. Tenants have a reasonable interest in privacy, and owners need to reach the equipment, so agreeing on a window in advance helps. The technician may need to reach the panel, the affected room, and sometimes a meter area or exterior wall. Pets should be secured, valuables put away, and a path cleared. Both sides should understand that the scope is explained before work begins, so nobody is surprised. A short list kept on your phone is often more useful than memory, especially when several people in the household are involved.
If the problem is a safety concern, such as burning smells or sparking, say so plainly and do not wait for a convenient time. Stop using the affected circuit and report it in writing and by phone. Neither side should attempt repairs beyond their skill. We can examine the electrical equipment, explain what we see, and describe the scope, but we cannot decide who owes what under a lease. Call us to talk it through and confirm availability for your area. Plan for some inconvenience during the visit, such as parts of the home being without power for a period that cannot be promised in advance.
