Residential and commercial electrical servicesCall (754) 226-1874

Guides

How Electrical Permits Work in South Florida

A permit is the local government's way of confirming that electrical work was planned, performed and checked to the adopted rules. The process looks similar across Broward County and the cities from Boca Raton to North Miami, but each city and county has its own forms, fees and habits, so the details always come from the permit office.

Electrical testing tools, safety gloves, and a 24 Hour Electrician Near Me branded case arranged for a guide

What a permit actually is

An electrical permit is an official record, issued by a building department, that says a specific piece of electrical work is approved to be done at a specific address by a named contractor. It is not a one-time paper formality. It opens a file at the local building department, and that file leads to inspections, and the inspections lead to a final approval that closes the record.

That record has value long after the work is finished. It shows that the work was reviewed, that an inspector looked at it, and that it was accepted. Buyers, lenders, insurers and later contractors can find it. A property whose electrical history is documented is easier to sell, easier to insure and easier to maintain, because the next person knows what was done.

The permit also matters for safety. Electrical work is hidden behind walls and ceilings, so the owner usually cannot judge it by looking. An inspector who checks the work at the right stage provides a second set of eyes on connections, wire sizing, protection devices and grounding, which the owner would otherwise have to take on faith.

24 Hour Electrician Near Me technician installing recessed lighting in a South Florida kitchen

Who issues permits in this region

Within Broward County and the cities from Boca Raton to North Miami are dozens of municipalities. Depending on where the property sits, the permit might come from a city building department, from the county, or from a special district. A home in an incorporated city generally deals with that city's building department. A home in an unincorporated area typically deals with the county. Some cities contract with the county or another agency for plan review or inspections.

This patchwork is the reason owners hear different answers from neighbors a few miles apart. Fees, hours, online portals, required documents and inspection scheduling vary. Some jurisdictions have robust online systems where contractors apply, upload documents and request inspections. Others still rely on in-person visits or phone calls. The best source for an address-specific answer is the building department that serves that address.

Our location pages describe the housing stock and typical calls in Broward County and the cities from Boca Raton to North Miami, but they cannot replace a call to the permit office.

Who pulls the permit and why it should be the contractor

In general, the electrical contractor performing the work applies for the permit under their own credentials. That is by design: it puts responsibility for the work on a contractor who is accountable to the licensing authority. Owners are sometimes offered a different arrangement, in which the owner pulls the permit as the owner-builder. Some jurisdictions allow this for certain work on an owner's own residence, with conditions and limits, and an owner who does so takes on responsibility for the work and for anyone they hire.

Be careful about a contractor who asks you to pull the permit yourself so that they can avoid the process. That arrangement can leave you responsible for work you did not do, and it may signal that the contractor lacks the credentials to pull permits. Ask directly who will pull the permit, and ask to see the permit number once it is issued. You can verify the contractor's credentials with the state's professional licensing lookup and the permit's contractor name with the building department.

Our guide on what to ask before hiring an electrician includes the permit question and others that help separate careful contractors from risky ones.

The usual sequence from application to final

Steps differ by jurisdiction and by the size of the job, but most electrical permits follow a recognizable path. Smaller jobs, such as a circuit addition or a fixture change, may be reviewed quickly or over the counter. Larger jobs, such as a service upgrade, a rewire or a commercial tenant improvement, may need drawings, load calculations and a longer review.

  1. The contractor submits an application with the address, scope of work, contractor details and any required drawings or calculations.
  2. The building department reviews it, and may ask for corrections or clarifications.
  3. The permit is issued and fees are paid. The permit card or record is posted or made available at the site where required.
  4. Work begins. For hidden work, a rough inspection is requested before walls or ceilings are closed.
  5. The inspector visits, reviews the work, and either approves it or lists corrections.
  6. After corrections, the work is re-inspected as needed, and finishing work proceeds.
  7. A final inspection is requested once devices, fixtures and equipment are installed and the system is ready to energize.
  8. Once the final is approved, the permit is closed, and for service work the utility is told it can connect or restore power.

Rough and final inspections in plain terms

The rough inspection happens while the work is still visible: wiring is run, boxes are set, and the walls are open. The inspector checks wire size and type, how cables are supported and protected, the number of conductors in boxes, the layout of circuits and the connection of any panels. If everything passes, the walls can be closed.

The final inspection takes place after devices, fixtures and equipment are installed. The inspector checks that devices are properly installed, covers are in place, protection devices such as ground-fault and arc-fault protection are present where required, labeling is complete and equipment is connected as designed. For service changes, the inspector also checks grounding, bonding and the condition of the meter socket.

Our guide on getting ready for an electrical inspection covers how to prepare, including access, labeling and timing. The key point for owners is that an inspection is not an attack on the work. A correction list is part of the process, and a careful contractor will treat it as routine.

What owners should expect in terms of time

Timelines depend on the jurisdiction, the season and the complexity of the job, and nobody can promise them in advance. A simple permit can be issued the same day in some places and may take longer in others. Plan review for larger work takes longer. Inspections are scheduled by the building department, usually by request through an online portal or by phone, and an inspector visits within a window that is set by the department's workload.

Busy times such as the weeks after a hurricane see far more permit activity, and the departments may adjust. Some jurisdictions have emergency procedures that allow certain urgent repairs to begin before a permit is issued, with the permit applied for shortly afterward. Those rules vary and should be confirmed by the contractor with the local department rather than assumed.

For the owner, the practical consequence is to build some flexibility into plans. If a remodel is scheduled around a move-in date or an event, ask the contractor how permitting and inspection timing fit into the schedule and what could cause delay. Our guide on the renovation electrical timeline shows where permits sit in the larger sequence.

Work that commonly needs a permit

The exact thresholds differ, but in general, new electrical work, alterations and additions need permits, while a limited class of minor like-for-like repairs may not. Examples of work that typically requires a permit include a service or panel upgrade, new circuits, rewiring, a generator inlet or transfer switch, an EV charger circuit, pool and spa wiring, new lighting circuits, a subpanel and the electrical portion of a remodel or an addition.

Our page on which electrical jobs need a permit goes into the difference between like-for-like repairs and new work. If you are unsure, ask the contractor and ask the building department. The cost of asking is small, and the cost of an unpermitted job can be large.

  • Panel replacement or service upgrade
  • New circuits, such as a dedicated circuit for an appliance
  • Whole-house or partial rewiring
  • EV charger and generator connections
  • Pool, spa, dock and outdoor wiring
  • Remodel and addition wiring
  • Commercial tenant improvements and equipment hookups

Why unpermitted work causes problems later

Unpermitted electrical work is common, and the reasons are usually understandable: a previous owner wanted to save time, a handyman did not mention it, or the project grew beyond its original scope. The problems arrive later. An inspector at sale time may find work that does not match the permit file. A buyer's lender or insurer may require corrections. An insurer facing a fire claim may ask whether the wiring was permitted, and a negative answer can complicate the process.

There is also the safety issue. Work that has not been inspected has not been checked by an independent party, and it may contain errors that only show up under load or after years. Many fires start at connections that were poorly made and never inspected.

If you own a home with unpermitted work, the usual path is to have an electrician evaluate it and discuss with the building department how to bring it into compliance. That may involve opening walls, obtaining a permit after the fact and passing an inspection. The department's approach varies, and talking early is better than waiting for a sale to force the issue. Our guide on electrical inspections when buying a home explains how these issues surface.

Condos, associations and commercial properties

In a condominium or an association, there is often a second layer of approval beyond the building department. The association may require a written request, proof of insurance, a description of the work and permission for a contractor to use common areas, elevators or parking. Some require approval before a permit can even be applied for. Our guide on condo association electrical approvals describes this layer.

Commercial properties generally face more demanding review. A tenant improvement may require drawings stamped by an engineer or other design professional, a load calculation, coordination with the landlord and review by the fire department for items such as emergency lighting. Our page on tenant improvement electrical work explains how that fits together.

In every case, ask who is responsible for each step. A contractor who handles the permit paperwork on your behalf saves you time, but you should still keep copies of everything: the permit, the inspection results and the final approval.

How to verify a permit and keep your records

You can usually look up a permit through the building department's online portal, using the address or permit number. Verify that the scope matches the work, that the contractor named is the one performing it, and that inspections are being recorded. If you cannot find it, call the department.

Keep a file of permit documents, inspection approvals and the contractor's invoice. Photograph the work before walls are closed, including the panel interior with the cover off during the inspection, and make a note of where circuits go. A labeled panel, covered by our page on panel labeling and circuit mapping, is one of the most useful things you can leave for the next owner.

When the final inspection has been approved, request a copy of the approval or confirm that it appears in the department's records. That document is the evidence that your project is complete.

How our quotes and visits fit with permits

Quotes are given only by phone. For work that needs a permit, the quote discussion includes the fact that a permit and inspection are part of the job, and the on-site visit helps the technician determine what the building department will want to see. Complicated jobs need an on-site visit before a quote is final, and there is a service call charge for that visit, explained on the phone before dispatch.

We do not promise how quickly a permit will be issued or an inspection scheduled, since those depend on the building department. What we can do is explain what is typically required, prepare the application correctly and be ready when the inspector arrives. When you are ready to talk about a project, call and describe what you want done, and we will walk through the permit, the inspections and the steps in order.

Questions people ask

Who is responsible for getting the permit?

Normally the electrical contractor doing the work applies for the permit under their own credentials, which puts accountability on them. In some places an owner may pull a permit for work on their own residence under owner-builder rules, but that makes the owner responsible. Ask the contractor who will pull it, and confirm the permit number with the building department.

Do all electrical repairs need a permit?

Not always. Limited like-for-like repairs, such as replacing a worn device with the same type, often do not, while new circuits, panel and service changes, rewiring, generator and EV connections, and pool wiring typically do. Rules vary by city and county, so confirm with the contractor and the building department for your address.

How long does it take to get a permit and an inspection?

It depends on the jurisdiction, the size of the job and how busy the department is, so no one can promise a timeline. Simple permits may be issued quickly, while larger jobs need plan review. Inspections are scheduled by the department. Ask your contractor how permitting fits your schedule and what could cause delay.

What happens if I already have unpermitted electrical work?

It is best to deal with it before a sale or a claim forces the issue. An electrician can evaluate the work, and the building department can explain how to bring it into compliance, which may involve an after-the-fact permit, opening walls and passing an inspection. Approaches vary by jurisdiction, so talk to the department early.

How much will the permit and the job cost?

Quotes are given only by phone, and permit fees are set by each building department, so they differ between jurisdictions. Complicated jobs need an on-site visit before the quote is final. There is a service call charge for that visit, and it is explained on the phone before any technician is dispatched.

Do I need approval from my condo association too?

Often yes. Many associations require written approval, proof of contractor insurance and a description of the work before a contractor can start, and some require approval before a permit is applied for. Check your association's rules and ask your property manager. The building department's permit does not replace the association's approval.

Talk to 24 Hour Electrician Near Me

If "How Electrical Permits Work in South Florida" sounds like your problem, call and describe what you see, hear or smell at the panel, the outlet or the fixture. We explain what the work involves, and some jobs need a visit before a quote.

Related pages

  • When Permits Apply: A plain guide to like-for-like repair versus new electrical work, which jobs usually need a permit, and the risks of unpermitted changes at sale time.
  • Inspection Day: Get ready for rough and final electrical inspections: access, labeling, timing with open walls, and what inspectors typically look at on each visit.
  • Condo Approvals: How to get association approval before electrical work in a condo: alteration requests, contractor insurance paperwork, access hours and shutoff windows.
  • Code Corrections: A South Florida guide to understanding correction notices, defining electrical repair scope and preparing for reinspection.
  • Renovation Timeline: The electrical phases of a renovation in order: planning, rough-in, inspection, finish and punch list, with what to decide and when in South Florida.
  • After the Hurricane: Post-storm electrical hazards: damaged service equipment, flooded panels, generator misuse, and how to know when it is safe to restore power to a home.

Talk through the electrical service you need.

Request service

Related pages

Call (754) 226-1874