Why the questions matter more for electrical work
When a painter does a poor job, you can see it. When an electrician does a poor job, you may not see it for months or years. A loose connection inside a panel, an undersized wire on a new circuit, or a missing ground can sit quietly until heat, load or moisture exposes it. That delayed consequence is why electrical work is regulated, why permits and inspections exist, and why it is worth asking questions before you hire someone.
The good news is that the questions are not complicated, and a contractor who does careful work will be glad to answer them. The conversation also tells you a lot about how the job will go. Clear, patient answers usually mean clear, patient work. Evasive answers or irritation at a reasonable question are a warning.
This page is for property owners, tenants who need to coordinate with a landlord, and managers who hire contractors on behalf of others. Use the questions as a checklist when you call, and write down the answers. If you are comparing several contractors, ask each one the same questions.

Who is actually doing the work
Start with identity. Ask for the company name, the name of the person who will be at your property, and whether that person is an employee of the company or a subcontractor. In a larger firm, the person who gives you the quote may not be the person who performs the work, and that is fine as long as you know who is responsible.
Ask what qualifications the person holds. Electrical work in Florida is regulated, and the person performing it should be working under the authority of a properly credentialed electrical contractor. You can ask for the contractor's credential number and verify it yourself with the appropriate state or county authority. It takes a few minutes and is the most reliable check available. We never claim credentials on your behalf in a web page; the right approach is to verify them directly.
Beware of a contractor who is vague about who will do the work, who says a friend will help, or who offers to do the job at a lower price without anyone being responsible. A clear chain of responsibility matters when something goes wrong.
- What is the full company name and the name of the person who will arrive
- Is that person an employee or a subcontractor
- What credential is the work performed under, and how can I verify it
- Who is responsible if something needs to be corrected later
Verifying credentials without taking anyone's word
A verbal assurance is not verification. Credentials in Florida are tracked by public agencies, and lookups are available online. Check that the name and number match, that the status is active, and that it covers the type of work you are asking about. A residential job and a commercial job may involve different categories, and a contractor outside their category should not be doing your work.
If the work is in a condominium or a community with an association, ask whether the association requires proof of credentials and insurance before work begins. Many do, and the contractor should be familiar with providing it. Our page on condo association electrical approvals explains what associations commonly ask for.
Be careful with door-to-door offers, particularly after storms. Storm chasers and unverified crews appear after hurricanes, and some are legitimate while others are not. A safe habit is to let nobody start work until you have verified credentials, understood the scope and confirmed how permits will be handled. Pressure to act the same day is not a reason to skip these steps.
Permits and inspections
Ask directly: will this job need a permit, who will pull it, and who will schedule the inspection. Many electrical jobs require a permit, including panel replacements, service upgrades, new circuits, and generator and EV charger installations. Some small repairs do not. The rules differ across South Florida's cities and counties, so the answer should be specific to your location.
A contractor who says a permit is not needed for something you believe requires one should be asked to explain. A contractor who proposes skipping the permit to save time or money is asking you to take on risk. Unpermitted work can complicate a sale, an insurance claim or a later renovation, and it means no independent inspector has reviewed the work.
Our guides on electrical permits in South Florida and preparing for inspection day explain how the process works. You should know what the inspector will check and what you need to do on the day, such as providing access to the panel and the work areas.
Insurance and protection for your property
Ask about insurance in plain terms. General liability coverage helps protect your property if the work causes damage. Workers compensation coverage protects the people working in your home if they are injured. If an uninsured worker is hurt on your property, a dispute can reach the owner, which is a risk worth avoiding.
Ask for proof of insurance rather than a promise. A reputable contractor can provide a certificate, and a condominium or commercial property will often require one. Check that the policy is current and that it matches the company name you are dealing with.
Also ask how the contractor protects your home during the job. Will floors and furniture be covered. Will dust from drilling or cutting be contained. How will the power shutoff be handled, and how will you be told in advance. These are small details, but they reveal how the company treats the property it works in.
Scope, quotes and charges
Ask how quotes work. At this company, quotes are given only by phone. Complicated jobs need an on-site visit, and there is a service call charge that is explained on the phone before dispatch. We recommend you ask any contractor the same question so that you know in advance what the first visit costs and what it covers.
Ask what the quote will include, and ask for it in writing for anything beyond a small repair. The scope should say what will be installed, what equipment is used, whether permits and patching are included, and how changes are handled. Our page on comparing electrical quotes goes deeper on how to line up several quotes fairly.
Ask about payment terms. It is reasonable for a contractor to ask for a deposit on larger jobs for materials, but you should understand how the schedule works and what you receive in exchange at each step. A demand for full payment before any work begins deserves a pause.
Diagnosis and honesty about what is wrong
A good electrician explains what they found in terms you can follow. Ask the technician to show you the problem when it is visible: a burned connection, a damaged device, a corroded terminal. If they cannot show you, ask them to describe it and to explain how they reached the conclusion. You do not need to understand every technical detail, but you should be able to follow the logic.
Ask what the options are. Many problems have more than one reasonable fix, with different tradeoffs in cost, effort and longevity. For example, a failing outlet might be replaced alone, or the whole circuit might be reviewed because the cause is upstream. A good technician lays out the choices and recommends one, and explains why.
Be cautious if a visit for a small problem turns into a long list of urgent and expensive findings with no evidence. Real hazards exist and should be taken seriously, but they should be documented. If you are unsure, ask for the findings in writing and consider a second opinion. Our page on the difference between an emergency and a problem that can wait can help you judge urgency.
Questions about the specific job
Different jobs raise different questions. For a panel replacement, ask about the main breaker rating, whether the existing grounding will be checked, and how long power will be off. For an EV charger, ask whether your service can support the load and whether a load calculation will be done. For a generator hookup, ask how the home will be isolated from the utility to prevent backfeed.
For outdoor and pool work, ask about the ratings of the devices and enclosures, the use of ground-fault protection, and how bonding will be handled. For older homes, ask how the contractor handles surprises such as aluminum branch wiring, ungrounded circuits or panels from brands with known concerns. Our pages on aluminum wiring remediation and electrical panel repair describe typical considerations.
The point is not to quiz the contractor like an exam but to see whether they are familiar with the specific issues of your job. Someone who has done the work many times answers easily and may mention things you had not thought of.
- Panel work: main breaker rating, grounding review, shutoff duration, labeling afterward
- EV chargers: service capacity, load calculation, dedicated circuit, permit
- Generators: isolation from the utility, transfer method, location, permit
- Outdoor and pool: device ratings, ground-fault protection, bonding, enclosures
- Older homes: wiring type, grounding, panel brand, how surprises are handled
After the work is done
Before you pay the final amount, ask what happens at completion. Will the work be tested in front of you. Will the panel directory be updated so each breaker is labeled. Will you receive paperwork, including the permit record and any inspection approval. If you have questions later, whom do you call.
Ask about follow-up in plain terms and listen carefully to the answer. We do not publish warranty terms in this guide because they should come from the contractor in writing for your specific job. If a contractor mentions a warranty or a guarantee, ask what it covers, how long it lasts and what you must do to make a claim, and ask for it in writing.
Keep your records. A folder with the quote, the permit, the inspection approval, the invoice and any equipment documents is valuable at sale time, for insurance and for the next electrician who works on the property.
A call checklist you can use
Keep this list near the phone when you call. You may not need every item for every job, but the more complicated the work, the more of them matter.
You can also use the list when you are the property manager for others. Association boards and landlords often ask the same questions for liability reasons. Our pages on landlord and tenant electrical repairs and condo electrical responsibility explain who typically handles what.
- Who is the company and who will be at my property
- How do I verify the credential the work is performed under
- Do you carry liability and workers compensation insurance, and can I see proof
- Does this job need a permit, and who handles it
- How do quotes work, and is there a service call charge
- What does the quote include and exclude, and will it be written
- How are changes handled if conditions differ
- How will my property be protected during the work
- What testing and labeling will be done at the end
- Who do I contact if something is wrong later
Trust the process, not the pitch
A good hire is the result of a process: verify, ask, compare, document. It does not depend on a charismatic salesperson or a limited-time offer. The contractors who welcome these questions are usually the ones who do careful work, and the process protects both sides.
If you are in the middle of an emergency, such as a burning smell or no power at all, safety comes first. Move away from the hazard, shut off what can be safely shut off, and call 911 for fire or injury. Then call a qualified contractor and ask the same questions as you can, even if briefly. A short call that covers credentials, permits and charges is better than none.
When you are ready, call us. We will answer these questions directly, explain how quotes and service call charges work, and tell you honestly when a job needs a site visit before anyone can say more.
Questions people ask
How do I check whether an electrician is qualified in Florida?
Ask for the contractor's credential number and look it up with the appropriate state or county authority, which is a public lookup. Confirm the name matches, the status is active and the category covers your type of work. Do not rely on a verbal statement alone. A legitimate contractor expects you to check and can give the number without hesitation.
Should I hire an electrician who says no permit is needed?
Ask them to explain why. Some small repairs do not need a permit, but panel changes, new circuits, service upgrades and many installations do. A contractor who proposes skipping a required permit shifts risk to you, including trouble with insurance, resale and later work. Your city or county permit office can confirm what applies to your job.
What insurance should an electrician carry?
Look for general liability coverage, which helps with property damage caused by the work, and workers compensation coverage for the people working on your property. Ask for a certificate as proof rather than relying on a promise, and check that it is current. Condominiums and commercial properties often require this documentation before work starts.
Is it normal for an electrician to charge for a first visit?
Yes, many companies charge a service call fee for sending a technician and diagnosing a problem, and complicated jobs need a visit before a firm quote. At this company the charge is explained on the phone before dispatch, and quotes are given only by phone. Ask any contractor how their first visit works so you know in advance.
What should I do if a contractor pressures me to decide today?
Pause. Real safety hazards deserve prompt attention, but they can be documented and explained. Pressure to sign immediately, pay in full or skip a permit is a warning sign. Ask for the findings and the quote in writing, verify credentials, and take time to compare. A reputable contractor will not mind that you checked.
What paperwork should I keep after an electrical job?
Keep the written quote, the invoice, the permit record, the inspection approval if one was required, and any equipment documents. Also keep a photo of the updated panel directory. These records help at sale time, with insurance, and whenever a future electrician needs to understand what was done in the property.
Dealing with "Questions to Ask Before You Hire an Electrician"? Tell us where in the building it happens and what changed before it started. We will say what the electrician would check and how the visit charge is explained.
Related pages
- Comparing Quotes: Compare electrical quotes by scope, inclusions, permits and clarity instead of the bottom line alone, with questions to ask on the phone.
- Electrical Permits: How electrical permits and inspections generally work in Broward County and the cities from Boca Raton to North Miami, and what owners should expect from the process.
- Electrician or Handyman: Where basic home repair ends and electrical work that needs a qualified person begins, with examples, risks of getting it wrong and questions to ask.
- Emergency or Not: A triage list for electrical symptoms: which need immediate action and a call right now, and which can safely be scheduled for a later visit.
- Inspection Day: Get ready for rough and final electrical inspections: access, labeling, timing with open walls, and what inspectors typically look at on each visit.
- Older Home Wiring: Wiring materials found in mid-century South Florida construction, how they age in humid conditions, and signs that an older system needs attention.
