Residential and commercial electrical servicesCall (754) 226-1874

Services

Who should handle the outage?

Separate immediate danger, a utility outage, damaged service equipment, a building-wide problem and an internal circuit condition before requesting an electrical appointment.

24 Hour Electrician Near Me crew loading a branded service van with ladders and electrical equipment

Leave danger before checking anything.

Call 911 and move away when there is fire, smoke, active arcing, a downed line or an immediate threat to people. Do not enter standing water to reach a breaker, appliance, switch or cord. Do not touch a vehicle, fence, branch or metal object that may contact a fallen line. Never assume a downed conductor is de-energized.

A strong burning odor, visible scorching, unusual heat or repeated breaker operation also requires caution. Do not remove panel covers, handle exposed parts or repeatedly reset a breaker. If conditions can be observed safely, report what you see from a normal location and keep people away from the affected area.

Immediate hazards belong with 911 or the utility. Normal service routing begins only after the customer can remain in a safe place.

24 Hour Electrician Near Me electrician at work in a South Florida property

Five branches lead to different next steps.

Branch 1: neighbors and public lights are also out

This pattern suggests a broader utility outage. Report or confirm it through the utility's official outage system. An electrical contractor does not control utility restoration and cannot provide the official restoration estimate. Keep refrigerators and freezers closed, use flashlights rather than open flames, and follow public-safety guidance.

Branch 2: neighbors have power, but the whole property does not

The cause could involve utility equipment serving one property, the meter or service connection, customer-owned service equipment, a main disconnect or another building-side condition. FPL's guidance distinguishes utility-owned equipment from property-owner equipment attached to the building. Do not approach visible damage. Report utility concerns and request qualified evaluation when customer equipment may be involved.

Branch 3: only part of the property is out

Partial loss can involve one or more circuits, a protective device, a connection, equipment or part of the distribution system. Note which rooms, outlets, lights and appliances are affected. Do not open the panel. If a breaker was clearly tripped and can be reached safely without water or damage, follow utility or manufacturer guidance; if it trips again, stop resetting it and request evaluation.

Branch 4: lights flicker, dim or brighten

FPL distinguishes brief flickers from voltage fluctuations and asks customers to report recurring power concerns. Determine whether neighbors or other units are affected. If the concern appears limited to the property and continues, a qualified electrician may need to investigate. Do not assume flicker always means one specific repair.

Branch 5: one device or appliance is not working

A single nonworking item may involve the device, receptacle, switch, circuit, control or appliance itself. Stop using equipment that is damaged, hot, wet or producing odor. The intake should identify other devices on the same circuit and any recent changes, but it should not coach the customer through energized testing.

911

Fire, smoke, arcing, downed lines and immediate life safety.

Utility

Neighborhood outages, damaged utility equipment and official restoration status.

Management

Common systems, electrical rooms, multiple units and building authorization.

Electrician

Qualifying customer-owned service, panel, circuit, device and wiring conditions.

Useful details that do not require hazardous testing.

Complete outage

Record whether nearby properties are affected, what the utility reports, when power stopped and whether severe weather or visible damage occurred. If the utility says service is available, identify whether the meter display or building common areas appear normal only from a safe position. Do not touch service equipment.

Several rooms without power

List the rooms and any equipment that was operating when power stopped. Note whether a breaker appears out of position without removing a cover. A shared pattern can help identify the circuit or distribution area, but the final cause requires testing.

Intermittent loss

Record time, duration and which loads were running. Intermittent conditions can be difficult to reproduce; a written timeline is more useful than repeatedly operating equipment to trigger the problem. Heat, odor, sound or discoloration should be reported immediately.

One unit in a multifamily building

Ask whether hallways, elevators, neighboring units or common equipment are also affected. Building management may know about a common issue or control access to the relevant electrical room. The resident should not enter restricted spaces.

Power returns before the appointment

A restored condition does not always explain the cause. Utility restoration may resolve a utility outage; an intermittent building condition may need follow-up. Preserve the timeline, utility messages and safe observations. Canceling or keeping the appointment depends on the pattern and risk, not simply whether lights are currently on.

Flicker, fluctuation, partial outage and repeated loss are not interchangeable.

A flicker is a brief interruption in which power turns off and returns quickly. A fluctuation may appear as lights dimming or brightening. A partial outage leaves selected circuits or areas without normal operation. Repeated loss can follow a pattern tied to weather, loads or time. Customers should describe what they actually observe rather than choose a technical cause.

FPL asks customers experiencing flickers or fluctuating power to determine whether neighbors are affected and to report recurring concerns. If the issue appears limited to one property, a qualified electrician may need to investigate customer-owned equipment. Both routes can be appropriate: utility reporting addresses supply concerns, while property evaluation addresses internal conditions.

Lights that change when a large appliance starts do not automatically prove one specific defect. The provider needs the property context, equipment involved and testing. Likewise, one electronic device rebooting may reflect the device, a power disturbance or another condition. A page should not convert a broad symptom into a guaranteed repair.

When the condition occurs only during rain, wind or another event, note the pattern without approaching exterior electrical equipment. Intermittent faults can be difficult to reproduce, so dates, duration and affected areas improve the assessment. Video may help only when recorded safely from a normal occupied area.

Do not create a second hazard while looking for the first.

Customers can safely help by keeping people away, reporting the condition, turning off affected appliances only when this can be done normally and safely, and following utility or emergency instructions. The provider, not the customer, should determine energized-work boundaries and testing.

  • Do not open a panel or meter enclosure.
  • Do not enter a flooded room to reach electrical equipment.
  • Do not touch fallen lines, branches, fences or vehicles near them.
  • Do not use outdoor cooking equipment or portable generators indoors.
  • Do not backfeed a building through an outlet or improvised cord.
  • Do not keep resetting a breaker that operates again.
  • Do not use damaged, wet, hot or scorched cords and appliances.
  • Do not climb to inspect weather-damaged service equipment.
  • Do not assume power will remain off while repairs are attempted.

Responsibility changes with the building.

Single-family home

The homeowner may control the panel and branch circuits, while the utility controls designated service equipment. FPL states that certain equipment attached to the house is homeowner responsibility and may need qualified repair before reconnection. Exact ownership and repair steps should follow current utility guidance.

Condominium

The unit owner, association and utility may each control different equipment. A loss confined to one unit may still require access to common electrical rooms. Multiple affected units should be reported to management. The website should not decide financial responsibility from symptoms alone.

Rental or apartment

Tenants should notify the landlord or manager, except when immediate danger requires emergency action. The manager can coordinate common-system access and authorize a provider. The request should identify occupant access, owner approval and billing responsibility.

Commercial tenant

A tenant outage can involve private equipment or base-building distribution. Identify affected operations, critical loads, landlord contact, safe shutdown limitations and who can authorize work. Refrigeration, security, access and customer operations may require a continuity plan.

Managed or institutional property

The facility contact should provide one authorized coordinator, equipment access and known system information. Specialized distribution, generators, life-safety equipment and engineered systems remain outside advertised scope until capability is verified.

Some outages require a continuity plan beyond electrical repair.

Households relying on electrically powered medical equipment should maintain an outage plan based on guidance from healthcare providers, equipment suppliers, emergency-management resources and the utility. A standard service appointment is not a substitute for backup planning or emergency assistance. The intake should never promise that a technician can protect a medically dependent occupant from an outage.

Businesses should identify refrigeration, security, access, communications, lighting and equipment that affect safe operations. The authorized manager decides whether areas should close or loads should remain off. An electrician can evaluate qualifying building equipment, but utility restoration, emergency management and operational decisions may involve other parties.

Condominiums and multifamily buildings need a communication chain. Management can confirm whether elevators, hallways, pumps, gates and multiple units are affected, then coordinate building engineers, utilities and contractors. Individual residents should not enter common equipment rooms or operate shared systems.

When power returns, equipment may restart automatically. Follow manufacturer and facility procedures. A business or managed property may need a controlled restart rather than energizing every load simultaneously. The electrical provider should state whether restart coordination is part of the actual scope.

Power cannot be restored safely until damaged equipment is ready.

FPL explains that homeowners are responsible for certain electrical equipment attached to the property, while the utility owns the service line and meter. If customer-owned equipment is damaged, qualified repair and required inspection may be necessary before reconnection. Do not attempt repairs or approach damaged equipment.

After a storm, stay away from downed lines, flooding, meter damage and loose service components. Use official outage reporting. When the utility or building official gives instructions, record them for the electrician. A contractor cannot promise reconnection timing because utility and inspection steps may remain.

Generator safety

Portable generators operate outdoors away from doors, windows and vents. Never backfeed building wiring through an improvised connection. Turn off appliances that could create hazards when utility power returns and follow manufacturer and public-safety guidance. Building-connected systems require appropriate transfer equipment.

Water intrusion

Do not energize or touch equipment exposed to water. Tell the office which areas were affected and whether the property has been cleared for entry. Evaluation may extend beyond one device, and other trades or restoration professionals may be involved.

Define the diagnostic scope before dispatch.

The visit should confirm the reported pattern, examine accessible equipment within scope, perform appropriate testing and explain findings. A limited diagnostic call is not a certification of the entire property. The provider should state what was evaluated, what remained inaccessible and whether utility or management action is still required.

A recommendation might involve a breaker, connection, device, circuit, panel, service equipment or further investigation. It may also conclude that the issue is on the utility side or outside the provider's verified specialty. The customer deserves the reasoning and alternatives, not a predetermined sale.

If power loss is intermittent, the condition may not occur during the visit. The provider can document available evidence and recommend monitoring, follow-up testing or utility reporting. Uncertainty should be explained rather than converted into an unsupported repair.

Nine details improve routing.

Do not collect serial numbers from inside equipment or create the symptom again for the form. Safe photographs of exterior damage may help only when they can be taken from a normal location without approaching utility or energized equipment.

Closeout

The record should identify the reported condition, utility status, assessment, testing, work performed and any unresolved next step. When a permit, inspection, utility reconnection or building-management action remains, name the responsible party. For rentals and commercial properties, send documentation to the authorized owner or manager.

  1. Complete property address and unit or suite.
  2. Property type and management contact.
  3. Whether neighbors or common areas have power.
  4. Utility outage or power-quality report status.
  5. Whole property, several rooms, one circuit or one device.
  6. Start time, duration and recurrence.
  7. Heat, odor, noise, water, storm or visible damage.
  8. Recent remodeling, appliance or equipment changes.
  9. Authorized decision-maker and safe access.

Document the event before details disappear.

Record when power returned, whether restoration followed a utility notice or on-site work, and whether every affected area is operating normally. Note damaged equipment without opening it. Preserve utility messages, permit records, invoices and photographs taken safely. These details can help with follow-up, property management and legitimate insurance questions.

If flicker, heat, odor, noise or repeated trips continue, stop using affected equipment and request follow-up. Restoration alone does not prove that every customer-owned component is undamaged. The provider should explain any restriction and identify whether the next step belongs to the utility, electrician, manufacturer, another trade or building management.

Short answers for stressful situations.

My neighbors have power. Do I call the utility or an electrician?

Report the concern to the utility when service equipment or supply may be involved. If utility service is available, customer-owned equipment may need qualified evaluation.

Should I reset the breaker?

Do not touch damaged, wet or hot equipment. If a safely accessible breaker trips again, stop resetting it and request qualified help.

Why is only part of my home out?

Several conditions can cause partial loss. Record affected areas and loads; diagnosis requires appropriate testing.

Why does my neighbor have power?

Properties can be served by different lines or equipment. Use the utility's official outage tools before assuming the problem is internal.

Do flickering lights require an electrician?

Check whether others are affected and report recurring utility concerns. Persistent property-only flicker may need electrical evaluation.

Can you guarantee power restoration?

No. Utility restoration, repair, permits, inspections and reconnection can involve different parties.

Can I use a generator indoors?

No. Portable generators create carbon monoxide and must operate outdoors away from openings.

Does this form send a technician?

Official references

Talk to 24 Hour Electrician Near Me

If "Who should handle the outage?" sounds like your problem, call and describe what you see, hear or smell at the panel, the outlet or the fixture. We explain what the work involves, and some jobs need a visit before a quote.

Related pages

  • Range Circuits: Electric range and oven circuit work: matching the circuit to the appliance rating, replacing gas with electric, and what the panel must support.
  • Recessed Lighting: Planning can lights for Florida ceilings: layout, insulation contact, wet-area ratings, attic access and the questions to settle before any hole is cut.
  • Remodel Planning: Electrical planning for remodels, additions and tenant improvements in South Florida: sequencing, circuits, permits and decisions to make before walls close.
  • Service Mast Repair: Storm-bent masts and pulled weatherheads: what the electrician repairs, what the utility handles, safety around the line to the house, and how repairs proceed.
  • Smart Switches: Adding smart switches and dimmers to existing boxes: neutral wire availability, load compatibility, three-way setups and how to choose a hub or no-hub system.
  • Smoke and CO Wiring: How hardwired, interconnected smoke and carbon monoxide alarms are wired, why battery backup matters, and what changes in a sale or remodel.

Gathering the facts while the lights are still out

When power fails, the first hour tends to be confusing. A little structure helps. Look out a window and see whether neighbors have power, whether street lights are on, and whether you hear anything unusual outside. Check whether the whole building is dark or only part of it. Write down the time, what you were doing, and whether anything flickered or made a noise first. These notes will help separate a utility outage from a problem inside your home or business. Taking a few minutes to observe calmly is worth the effort, because it points you to the right call and spares you from guessing in the dark.

Look at the panel from a safe position, without opening it. Note whether the main breaker appears to be in a different position from the others, and whether any breakers look tripped. Do not force anything. If the building has a generator or battery backup, check that it is used according to the maker instructions and never connected to household wiring through improvised cords. Keep a flashlight handy, and avoid candles near anything flammable, particularly during storms. Staying safe matters more than solving the puzzle quickly, so if anything about the situation feels unsafe, step back and wait for help instead of pushing on.

Then decide whom to call. If neighbors are also dark, the utility is the first contact. If only your property is affected, or if you see damage at the meter, mast or service wires, tell the utility about the damage and keep away from it. For problems inside the building, call us, describe what you have noted, and ask about availability. The scope and any quote are explained before work begins. Passing along what you observed saves time for everyone, and it helps the person you call decide quickly whether the trouble is yours or the utility's.

After power returns: the cautious restart

When the lights come back, the crisis is not necessarily over. Power can return with unstable voltage, or it can drop out again. Before turning everything on, switch off or unplug sensitive electronics, large appliances and the air conditioner, then restore them one at a time with a few minutes between. This reduces the strain on equipment and makes it easier to notice if one item causes a problem. Waiting a short while also protects against a second outage catching devices mid-start. Bringing equipment back gradually is a small habit that protects expensive electronics and reduces the chance of a second failure right after the first.

Look for signs of trouble as things restart. A flicker, a hum from an appliance, an odd smell, or lights that seem brighter or dimmer than usual all suggest the supply may still be abnormal. Refrigerators and cold storage can be damaged by rapid cycling, so give them a few minutes. If anything seems wrong, turn the equipment off and keep notes about what you saw and when. These details are valuable if you need professional help. Storms can leave hidden problems behind, so any time you suspect the event was more than a simple outage, it is wise to have the system looked at by a professional.

If the outage was caused by a storm, flood or fire, have the system checked before assuming everything is sound. Water and heat can leave damage that is not obvious. Document the event with photos and short notes, which may help with insurance questions later. Call us to describe what happened and what has changed since power returned, and to confirm availability for a visit. Any scope or quote will be explained before work begins. Write down any odd behavior you noticed, because those clues often decide whether a quick visit is enough or a more careful investigation is needed.

Talk through the electrical service you need.

Request service
Call (754) 226-1874