The problem a generator inlet solves
Most people who own a portable generator discover the same frustration during their first long outage. The machine runs, the house is dark, and the only way to use it is a tangle of extension cords snaking through a cracked window or under a door. The refrigerator gets one cord, a fan gets another, and nothing reaches the lights, the well pump or the air handler. Meanwhile exhaust is being produced close to the house, and the cords are exposed to rain.
A generator inlet changes that arrangement. It is a weatherproof receptacle mounted on the outside wall, connected by permanent wiring to the main panel through a device that isolates the house from the grid. You plug the generator into the inlet with a single heavy cord, set the machine well away from the building, and then choose which household circuits it will power. The result is safer, quieter inside the home, and far more convenient.
The same arrangement also reduces a danger that is rarely discussed. Improvised connections made during an outage, such as plugging a generator into a dryer outlet with a homemade cord, can feed electricity backward into the utility network. That is called backfeeding, and it can seriously injure or kill a lineworker repairing the supposedly dead line. A properly installed inlet with an interlock is designed to make that mistake impossible.

The three parts of the system
Although installers sometimes describe a generator connection as one product, it is three separate pieces that must work as a set. Understanding them helps you ask good questions when you call.
- The inlet box, a weather-rated enclosure mounted outside, with a male inlet receptacle that matches your generator's output plug.
- The interlock, a mechanical device installed on the panel cover that prevents the main breaker and the generator breaker from being on at the same time.
- The cord and breaker, a heavy, correctly rated cord from generator to inlet, and a dedicated breaker in the panel that receives the generator's power.
How a panel interlock works
An interlock is a simple, rugged idea. It is a metal slide plate fitted to the panel cover next to the main breaker and the breaker reserved for the generator. The slide allows one of those two breakers to be on at a time, never both. To use the generator, you first switch off the main breaker, which disconnects the house from the utility. Only then can the slide be moved to release the generator breaker, which you then switch on. Going back to utility power reverses the order.
Because the interlock is mechanical, it does not depend on electronics, batteries or a control board. It works the same way in the middle of a hurricane as it does on a sunny day. That is a major reason it is popular for portable generator connections.
Interlocks are specific to the panel brand and model. A kit made for one panel will not fit another, and an interlock that is not listed for your panel is not acceptable. Some older panels, including certain discontinued brands, cannot accept an interlock at all. If your panel is one of those, the better path may be a different transfer arrangement or a panel replacement, which we discuss in our pages on transfer switches versus interlocks and generator transfer equipment.
Choosing the inlet: amperage, receptacle type and your generator
The inlet must match the generator. Portable generators produce power at a specific voltage and a maximum current, and they offer outlets that fit particular plug shapes. A common home setup uses a 30 amp or a 50 amp inlet. The right one depends on the output of your machine, not on what you wish it could do. A small unit with a 30 amp outlet should not be connected to a 50 amp inlet and cord in the hope of getting more power. The generator's capacity is what limits you.
Bring the generator's model number to the conversation, or a photo of its data label and outlet panel. Ask yourself whether you already own the generator or are still shopping. If you are still choosing, we recommend deciding on the electrical connection first, because the receptacle type is easier to match before you buy. Our guide on choosing a generator for your home covers the sizing questions in plain terms.
Weather matters as well. The inlet box should be rated for wet locations and sit at a height where it is protected from splashing and, where feasible, above likely flood levels. Salt air will corrode low-grade hardware quickly, so the enclosure and fasteners should be suited to coastal conditions. The inlet also needs a cover that closes when no cord is attached, so insects and water stay out.
Deciding which circuits to power
A portable generator cannot run everything in a house, so the interlock approach asks you to choose. When the generator breaker is on, power flows into the panel, and every circuit whose breaker is on is a candidate to receive it. The generator's capacity determines how many you can run at once. This means you control the load by switching individual breakers on and off, and the discipline of doing so matters.
A typical priority list for a South Florida home includes the refrigerator and freezer, a few lighting circuits, a fan or two, internet equipment, phone charging, and perhaps a small window or mini-split cooling unit. Items such as an electric range, a large central air system, an electric water heater or a dryer draw far more than a portable generator can handle and are normally left off.
Writing the priority list ahead of time is helpful. Many homeowners label the breakers they intend to use, which is easier when the panel itself has good labels. If your panel directory is a mess, a panel labeling and circuit mapping visit can make outage night much less stressful. A well-labeled panel lets anyone in the household, not only the person who understands it, operate the system correctly.
Where the generator itself belongs
Exhaust from a portable generator contains carbon monoxide, a colorless, odorless gas that kills people every year after storms. A generator must never run in a garage, a carport, a screened porch, a lanai or near an open window or door, even if the garage door is up. It belongs outdoors, on level ground, well away from the building and positioned so exhaust drifts away from any opening.
That is one more reason the inlet is better than cords through windows. The cord from the generator to the inlet is short in comparison, the machine sits where it should, and the doors and windows can stay closed. Install a carbon monoxide alarm inside the home as well, and make sure its batteries are fresh. Our page on smoke and CO detector wiring explains how those devices are powered and interconnected.
Think about security and rain too. A generator left unattended overnight can be targeted by thieves, and a machine sitting in standing water is a hazard. Some owners build a simple platform or arrange a lockable chain. Those practical details are outside the electrical scope, but they affect where the inlet box should be mounted. Mount it close to the spot where you realistically plan to place the generator.
What installation involves
An installation visit typically starts with the panel. The technician identifies the brand and model, confirms an interlock is available and listed for it, checks that there is a spare space for the generator breaker and looks at the condition of the bus and the existing breakers. Any burned, loose or damaged component found here is raised before anything is added.
Next comes the route. The inlet box is mounted on an exterior wall, as close to the panel as practical, with conductors running through conduit or cable appropriate to the location. Short, direct runs reduce cost and voltage drop. If the panel is in a garage, the route is easy. If it is on a far interior wall of a block home, the path may be longer and may need to pass through attic space or along a wall surface.
The final steps are installing the interlock, adding and connecting the generator breaker, labeling everything and testing. The test is more than flipping a switch. It includes verifying that the interlock actually blocks both breakers from being on at once, confirming polarity and grounding at the inlet, and, where possible, running a generator to confirm the circuits power up as intended. You should walk away knowing the exact sequence for starting and shutting down.
Permits, inspection and your utility
Adding an inlet and interlock modifies the service equipment, which is why it generally requires an electrical permit and an inspection in South Florida jurisdictions. Requirements differ between cities and counties, and the local permitting office has the final word. Our guide to electrical permits in South Florida explains how the process usually works.
Inspection protects you in a practical way. An inspector looks at the inlet, the interlock, the labeling and the grounding, which are the points most likely to be done wrong in a rushed or improvised job. Insurance companies and future buyers also tend to look more favorably on documented, permitted work than on an unexplained cord and a homemade adapter.
You do not need to notify the utility for a properly interlocked portable generator, because the interlock keeps your house isolated from the grid. A permanently installed standby generator is a different matter, and it involves an automatic transfer switch and often additional requirements. If you are leaning that way, read our page on automatic transfer switches before deciding.
Mistakes to avoid
Some of the most dangerous improvised practices are also the most common. The first is the double-ended cord, sometimes called a suicide cord, which has a plug on each end and is used to feed a house outlet from a generator. It energizes exposed prongs and can backfeed the grid. Never make or use one.
The second is attempting a panel modification yourself. Panels contain live conductors that remain energized even with the main breaker off, and the service lugs above the main are always live from the utility. Removing a cover and drilling or fitting parts exposes a person to lethal current. Leave all panel work to a qualified electrician.
The third is overloading the generator. Switching on too many circuits at once can stall the engine or damage it. Start the generator first, let it settle, then turn on circuits one at a time with the largest loads first, and watch the generator's load indicator if it has one. Finally, do not refuel a hot, running generator. Shut it down and let it cool, because spilled fuel on a hot engine is a common cause of fires.
Maintenance and getting ready before storm season
An inlet system is only valuable if it works when you need it. Exercise the generator periodically according to its manual, check that fuel is fresh and stored safely, and inspect the cord for cracks. Open the inlet cover occasionally to see that it is clean and dry, with no corrosion or insect nests. Practice the switching sequence once in calm weather so that doing it in the dark with a flashlight is not your first attempt.
Keep a written copy of the startup and shutdown steps near the panel, and make sure at least one other adult in the household knows them. Include the order of breakers, the priority circuits and a reminder that the main must be off before the generator breaker goes on. A laminated card does the job.
Our hurricane season electrical checklist and the page on power outage preparedness offer broader planning tips. If you have never had your system tested, or you inherited a setup from a previous owner and are not sure how it was installed, a technician can inspect it and tell you whether it is safe.
What to have ready and why to call
Quotes are given only by phone, and more involved jobs need an on-site visit. There is a service call charge, and it is explained on the phone before anyone is dispatched. To make that call productive, have the following information close by.
- The make and model of your generator and its rated output, or a photo of the data label.
- The brand and approximate age of your main panel, from the label on the inside of the door.
- Where the panel is located and where you would like the generator to sit.
- Which circuits matter most to you during an outage.
- Whether you have had a hurricane-season outage before and what went wrong.
- Whether you are considering a standby generator later.
Plan it before the next outage
The worst time to learn how your generator connection should work is during an outage, with the lights out, the neighborhood dark and every electrician busy. The best time is now, on an ordinary day, when the panel can be inspected, the correct parts ordered and the permit handled without pressure. If you own a portable generator, or you are thinking about buying one, call and describe your situation. A short conversation can tell you whether an inlet and interlock suit your panel and your generator, and what the next step would be.
Questions people ask
What is the difference between an interlock and a transfer switch?
An interlock is a mechanical slide on the panel cover that stops the main breaker and the generator breaker from being on together. A transfer switch is a separate device that moves chosen circuits between utility and generator power. Interlocks cost less and power any circuit you switch on, while transfer switches limit you to the circuits wired through them.
Is it safe to plug a generator into a dryer outlet?
No. Using a double-ended cord to feed an outlet can energize exposed prongs and send current back into the utility lines, which can seriously injure or kill a lineworker. It also bypasses protection in your own home. A properly installed inlet with an interlock is the safe way to connect a portable generator to the house.
Can any panel accept an interlock kit?
No. Interlocks are made for specific panel brands and models, and they must be listed for the panel they are used on. Some older or discontinued panels cannot accept one. A technician can identify your panel and tell you whether an interlock is available, or whether a different transfer arrangement or a panel replacement makes more sense.
How big should the generator inlet be?
The inlet should match your generator's outlet and its output rating, commonly a 30 amp or 50 amp receptacle. Installing a larger inlet than the generator supports does not give you more power, because the generator is the limit. Bring the model number or a photo of the data label so the right inlet and cord are selected.
Do I need a permit to add a generator inlet?
Generally yes. The work modifies the panel and service equipment, so most South Florida jurisdictions expect a permit and an inspection. Rules differ by city and county, and the local building department makes the final call. Permitted, inspected work also helps with insurance questions and with selling the home later.
Where should I run my portable generator?
Outdoors, on level ground, well away from the house, with the exhaust pointed away from doors, windows and vents. Never run it in a garage, carport, lanai or screened porch, even with a door open. Carbon monoxide builds up quickly. Keep a working carbon monoxide alarm inside the home as an extra safeguard.
Dealing with "Adding a Portable Generator Inlet"? Tell us where in the building it happens and what changed before it started. We will say what the electrician would check and how the visit charge is explained.
Related pages
- Generator Transfer: Guide to generator connections and transfer equipment in South Florida: load priorities, safe installation, permits and hurricane readiness.
- Transfer Switch vs Interlock: How transfer switches and panel interlock kits keep generator power off the utility lines, what each can power, and the trade-offs for a South Florida home.
- Choosing a Generator: Compare portable, inverter and standby generators by use case, fuel handling, noise and safe connection for South Florida homes and storm season.
- Hurricane Checklist: A pre-season electrical checklist for South Florida homes: panels, outdoor equipment, generators and surge protection to review before the first storm.
- Panel Repair: Guide to electrical panel repair, replacement and capacity upgrades in South Florida: what an evaluation covers, permits and what to prepare before a visit.
- Guest Suite Power: Electrical planning for a converted garage, in-law suite or detached unit: feeder size, subpanel choices, load calculations, metering and inspection steps.
