Residential and commercial electrical servicesCall (754) 226-1874

Problems

Power Flickering After a Storm

After a storm passes and power returns, lights that flicker, dim or surge can mean the grid is still settling, or that something on your property was damaged. This page explains how to tell the difference, which causes are dangerous, who handles what and how to describe the problem when you call.

24 Hour Electrician Near Me electrician at work in a South Florida property

Two very different explanations for the same symptom

Flickering after a storm has two broad explanations, and the first thing to work out is which one you have. One is that the utility network is still stabilizing: crews have restored lines, switched feeders back and forth and are adjusting equipment, and customers along the circuit see brief dips and interruptions. The other is that something on your side of the meter was damaged by wind, water, debris or a surge, and the symptom is a fault in your own system.

The distinction matters because the response differs. Utility-side problems belong to the utility, and you report them to the power company. Property-side problems, including the service mast, meter socket, main breaker, panel and wiring, belong to you and a qualified electrical contractor. Calling the wrong party wastes time during an already stressful period.

South Florida's storm season makes this especially relevant. Hurricanes, tropical storms and strong summer thunderstorms bring wind, flooding, lightning and salt-laden rain. Each can harm electrical equipment in a different way, and the damage is not always visible. A system can power up after a storm and still carry a hidden fault.

24 Hour Electrician Near Me technician carefully inspecting a residential breaker panel

Some patterns are clearly dangerous and should be treated as emergencies: sparks at the meter, a burning smell, a mast pulled away from the house, water in the panel or a downed line. In those cases, keep away, call 911 where there is fire or a person at risk and contact the utility about lines. The sections below cover the less obvious cases. For flood-specific advice, read flooded home electrical safety.

Signs the utility side is still settling

Utility-side flicker has a recognizable character. It tends to affect the whole house at once, with every light dimming or blinking together, and it often comes with brief outages that reset clocks and electronics. Neighbors typically see it too, and a quick conversation or a look at the street may confirm that others are blinking at the same moments.

Restoration after a storm often involves a series of switching operations. Crews close breakers on distribution lines, and protective devices called reclosers test the line and re-open if the fault is still present. Each attempt can look like a flicker or a short outage at your house. After a major event, it is common for service to blink repeatedly for a while as the network is stabilized.

Damage on the utility side can also linger. A tree branch resting against a line, a cracked insulator or a failing transformer can cause intermittent contact that flickers when wind blows. These faults sometimes resolve in dry weather and return when it rains.

If the whole neighborhood is affected, the best action is to report it to the utility and give your address. A report helps crews locate intermittent problems that do not show up as outages. Our guide on telling a utility outage from your own electrical problem offers a clear way to sort it out.

Not every flicker deserves a repair call. If it happens only briefly in the first period after restoration and then stops, it is likely part of the restoration process. Persistent or worsening flicker is another matter.

Signs the problem is on your side of the meter

Property-side flicker often has a different pattern. It may affect only part of the house, with some lights flickering while others stay steady. Neighbors report no trouble. The flicker may change with wind, with rain or with the use of large appliances, and it may be accompanied by buzzing, crackling or a hot smell at a specific location.

Typical property-side culprits after a storm include a service mast or weatherhead that has been twisted or loosened by wind, a meter socket with water inside, corroded or loosened connections at the meter or main breaker, a damaged service drop where it attaches to the house and wiring in a wet attic, soffit or exterior wall.

Another frequent cause is a loose or damaged neutral conductor, which we discuss in the next section. A neutral problem can make lights brighten and dim as loads change in the house, which is a distinctive pattern.

Water is a recurring theme. Rain driven by wind can enter a meter can, a weatherhead, an exterior junction box or a recessed fixture. Wet connections corrode, and corroded connections arc, which produces flicker. Salt in coastal air accelerates the process. See our guide on salt air corrosion and electrical systems.

If you can see physical damage, such as a leaning mast, a loose meter, a cracked cover or a dangling cable, treat the area as live and stay clear. Our page on damaged or hanging meter boxes explains what to do.

The loose neutral: a hidden cause of flicker and surging

Most South Florida homes receive what is called split-phase service: two hot conductors and one neutral. The neutral acts as a shared return and keeps the voltage balanced between the two halves of the house. If the neutral connection becomes loose, corroded or broken, the balance is lost.

When that happens, the voltage available to each half of the house depends on what is running on each side. Lights on a lightly loaded side may become too bright and burn out quickly. Lights on a heavily loaded side may become dim. Turning a large appliance on or off can make everything else change brightness, which appears as flicker or surging.

The danger is not only cosmetic. Over-voltage can damage electronics, appliances and LED fixtures, sometimes in a single event. Equipment may fail within days of a neutral problem developing, which is why a sudden string of burned-out bulbs and dead devices after a storm is a warning sign.

A neutral problem can arise on the utility side, in the service drop or transformer, or on your side at the meter, the main panel or the connection to the service entrance cable. Only measurement can tell which, and voltage readings at the panel with and without load are the standard approach.

If you notice bulbs that are alternately very bright and dim, or electronics failing together, switch off the main breaker if it is safe to reach and call for help. Do not wait for a second event. Equipment protection is one reason to consider a whole-home device; see surge protection and the comparison of whole-home surge protector types.

Storm damage you cannot see

Some of the most troublesome post-storm faults are hidden. A lightning strike near the house can send a surge through the wiring, damaging device contacts, breakers and electronics without leaving visible marks. The system may seem fine for a while and then begin flickering as damaged parts degrade.

Water intrusion inside walls and attics can wet cable insulation and junction boxes. The system may work until moisture creates a leakage path, particularly during humid weather. Flicker that appears days or weeks after a storm is a common signature.

Wind can loosen connections at the service entrance by repeated movement of the mast and cable. Over time, the strain works connections loose and increases resistance. A flicker that appears during gusts is a hint in that direction.

Tree limbs and debris can nick outdoor cable, scrape a service drop or pull on a conduit. A small scrape may not cause an immediate failure, but it exposes the conductor to moisture and corrosion.

Generators and temporary power are another source. If a portable generator was connected improperly during an outage, its backfeed or improper wiring may have damaged equipment, and an unsafe connection should be corrected. Our page on portable generator inlet installation explains the safe approach.

Because these faults are hidden, a professional inspection after a significant storm is a sensible precaution, especially if flicker, buzzing or unexplained device failures follow. Our after-hurricane electrical safety guide lists what to check before and after energizing.

What you can safely check yourself

You can learn a lot from simple observation without touching any equipment. Begin by asking whether the problem is the whole house or part of it. Walk through and note which rooms and lights are involved. Whole-house flicker leans toward the utility or the service; partial flicker leans toward a circuit or a connection inside.

Ask the neighbors. If several houses on the street blink together, report it to the utility. If only your house is affected, the odds shift toward your property.

Note the timing. Does the flicker occur when a large appliance such as the air conditioner starts? Does it track the wind or the rain? Does it happen at random? Time patterns are valuable to a technician.

Look, without touching, at the outside equipment. From a safe distance, check whether the mast leans, whether the meter is seated, whether the cable looks pulled or frayed and whether water is pooled near the base of the meter. Do not open covers or touch the meter. If anything looks damaged, keep people and pets away.

Check bulbs and fixtures. A single flickering bulb is often a loose bulb or a failing LED. Try swapping it into a different fixture. If the flicker follows the bulb, it is the bulb. If it stays with the fixture, the fixture or its circuit is the issue. Note that our page on buzzing or humming lights covers fixture-specific noise.

Unplug sensitive electronics if you suspect over-voltage. This is a practical protective measure while you wait for help, and it costs nothing but a few moments.

What not to do

After a storm, people are tired, impatient and eager to restore normal life. That is when risky shortcuts happen. A few things deserve a firm no.

Do not open the meter or the weatherhead. These parts are energized by the utility and cannot be turned off from inside the house. Contact with them can be fatal.

Do not touch or approach downed or sagging lines, and treat anything touching a fence, tree or roof as energized. Report it to the utility and keep others away.

Do not reset a breaker repeatedly if it keeps tripping, and do not tape or force it. A breaker trips for a reason, which our page on breakers that keep tripping explains.

Do not use a portable generator indoors, in a garage or near windows, and never plug a generator into a wall outlet to power the house. That practice backfeeds the lines and endangers utility workers and neighbors, and it creates carbon monoxide risk.

Do not stand in water to work on or near anything electrical. If a room is wet and the power is on, stay out and shut off power only if you can reach the panel dry and safely.

Do not assume that because the lights work, everything is fine. A system can function for a while with serious hidden faults. If something seems off, trust that instinct and ask for an inspection.

What a technician checks on a post-storm visit

A post-storm visit starts at the service point and works inward. The technician examines the mast, weatherhead, service drop attachment and meter socket for physical damage, corrosion, water intrusion and loose connections. Where appropriate and allowed, work that involves the utility's equipment is coordinated with the utility.

Next comes the main panel. With the cover removed by a qualified person, the technician looks for moisture, corrosion, discolored or loose lugs and signs of heating on breakers and bus connections. Neutral and ground bar connections get particular attention because of the neutral issue discussed above.

Voltage measurements at the panel, with and without large loads running, show whether the supply is balanced. A big difference between the two legs, or voltage that swings as loads change, suggests a neutral problem.

Branch circuits that serve the areas where flicker appears are tested. Junction boxes in wet areas such as attics and exterior walls, outdoor outlets and fixtures and equipment such as pool and irrigation systems are checked for water damage. Dedicated equipment like the air conditioner disconnect is inspected for loose or corroded terminals.

Surge damage is assessed by testing devices and checking any installed surge protection, whose indicator may show it has been used up. If surge protection is absent, the technician can explain options.

The findings are laid out in plain terms: what is urgent, what is advisable and what can wait. Complicated repairs need an on-site visit before a quote, and quotes themselves are given only by phone. A service call charge applies and is explained before dispatch.

Repairs, permits and the role of the utility

Repairs after storm damage fall into clear categories. Work on the utility's side, up to and including the service drop and meter, is handled by the power company. In many areas, the meter socket and everything beyond it on the property side belong to the owner and are repaired by a qualified electrical contractor. The boundary can be confusing, which is why our guide on utility meter and service responsibilities exists.

A typical sequence for a damaged service: the electrical contractor repairs or replaces the mast, weatherhead and meter socket, a permit is obtained where required and the utility is notified. After the municipal inspection passes, the utility reconnects or reseals the meter. The details differ by city, and permit offices in Broward County and the cities from Boca Raton to North Miami each have their own procedures.

Repairs inside the house, such as replacing corroded connections, damaged breakers or wet cable, are handled as electrical repairs and may or may not need a permit depending on scope. A qualified electrician can tell you what applies at your address. For more on that subject, see electrical permits in South Florida.

If an insurance claim is involved, documentation helps. Photos of damage, dates and a written description from a qualified contractor support the claim. Our page on insurance inspection electrical findings offers more background.

Be cautious with unfamiliar storm chasers who knock on the door. Ask for credentials, verify them with the local building department and compare what is proposed with what a trusted qualified contractor recommends.

Preparing ahead and what to have ready when you call

The best time to handle storm vulnerabilities is before the storm. A pre-season inspection of the service mast, meter socket, panel and outdoor connections catches loose or corroded parts. Surge protection at the panel limits damage from the next event. A clearly labeled panel and a plan for power outages make the aftermath easier. Our hurricane season electrical checklist lays this out.

If you are dealing with flicker now, gather some information before you call. Note when the flicker began relative to the storm, whether it affects the whole house or particular areas, whether neighbors have it and whether it changes with wind, rain or appliances. Tell us about any bulbs or electronics that have failed, any buzzing, crackling or smells and what you can see at the meter and mast from a safe distance. Photographs taken from a distance help.

If there is any smell of burning, visible sparks, water in the panel, a leaning mast or a downed line, move away from the area and call 911 or the utility first, as appropriate. Then call us for follow-up repairs once the area is safe.

If the situation is calm but unexplained, call and describe what you see. We will explain how the visit works, including the service call charge, before anyone is dispatched, and we will tell you honestly whether the symptoms point toward your equipment or toward the utility.

Questions people ask

Is flickering right after power returns normal?

Brief flicker during the first period after restoration is common because crews are switching and testing lines. If it stops quickly and your neighbors see it too, it is probably the grid settling. If it continues, worsens or affects only your home, the cause may be on your property and is worth having checked.

How do I know whether to call the utility or an electrician?

If neighbors are affected, the problem involves a downed line or the issue is at the transformer or service drop, call the utility. If only your property is affected, or you see damage to the mast, meter socket or panel, call an electrician. When unsure, describing the symptoms to us over the phone helps sort it out.

Why did several bulbs burn out right after the storm?

A sudden string of burned-out bulbs and failed electronics can point to over-voltage from a loose neutral or a surge. It is a warning sign worth acting on quickly. Unplug sensitive devices, consider switching off the main breaker if it is safe to reach and call for an inspection.

Can wet or salty air cause flickering weeks after a storm?

Yes. Water that got into a meter socket, junction box or fixture can corrode connections over time, and corroded connections arc and flicker. Salt air speeds this up near the coast. Flicker that develops days or weeks after a storm often traces back to moisture that was not obvious at first.

Is it safe to keep using the power while it flickers?

That depends on the cause, and without testing it is hard to know. Flicker with burning smells, sparks, buzzing at the panel or meter or very bright and dim lights is a reason to shut off the main and call. If the flicker is occasional and mild, minimize heavy loads and arrange an inspection promptly.

How is pricing handled for a post-storm repair?

Quotes are given only by phone. Simple repairs may be priced on the call, while damage to the service or panel typically needs an on-site visit first. A service call charge applies and is explained on the phone before dispatch. Call, describe what you see and we will explain the steps.

Talk to 24 Hour Electrician Near Me

For "Power Flickering After a Storm", a phone call comes first. Describe the circuit, the breaker or the equipment, and we will talk through the safe next steps and whether the job needs an on-site look.

Related pages

  • Utility vs Home: How to tell a utility outage from a fault at your own property, with simple safe checks to run before anyone is called and what each result means.
  • After the Hurricane: Post-storm electrical hazards: damaged service equipment, flooded panels, generator misuse, and how to know when it is safe to restore power to a home.
  • Damaged Meter Box: A meter box knocked loose by a vehicle, storm or rust is a hazard. Learn what to avoid, who handles which side, and what an electrician checks.
  • Whole-Home & Commercial: A practical guide to layered residential and commercial surge protection in Broward County and the cities from Boca Raton to North Miami.
  • Flickering Lights: Why house lights flicker: separating bulb, switch, circuit and utility service causes, and which flicker patterns call for an electrician right away.
  • My Home Only Out: When only your property is without power, the cause may be the main breaker, meter, service drop or a utility fault. Learn what to check and who handles it.

Talk through the electrical service you need.

Request service
Call (754) 226-1874