Residential and commercial electrical servicesCall (754) 226-1874

Problems

Your Neighbors Have Power and You Do Not

A single-property outage is confusing because the rest of the street looks normal. The cause could be inside your panel, at your meter, in the line that feeds your house or on the utility side. This page shows how to sort those possibilities safely and who is responsible for each.

24 Hour Electrician Near Me crew loading a branded service van with ladders and electrical equipment

Why one house can lose power when the street does not

A widespread outage is easy to understand: a line is down, a transformer has failed, and many customers are affected. When only your house is dark, the cause is more specific. Each home is fed by its own branch of the network, and a failure on that branch, or in the equipment at your property, takes out your power alone.

The path of electricity matters. Power travels from the utility's distribution line to a transformer, either on a pole or in a pad-mounted box, then through a service drop or underground service lateral to your house. It passes through the meter, then the main breaker in your panel and finally to branch circuits. A fault at any point along that path can leave you without power while neighbors on other branches are fine.

Several neighbors may share a transformer, so a transformer fault could affect a few houses, not the whole street. If your neighbors on one side are dark and the other side lit, that is a clue pointing to a shared piece of utility equipment. If you are the only dark house, the problem is more likely at your service connection or inside.

24 Hour Electrician Near Me electrician at work in a South Florida property

The responsibility boundary is the key practical point. The utility owns and repairs the lines up to a defined point at your house, which is typically the connection at the service drop or the meter, depending on the location. Everything on the house side of that point, which commonly includes the mast, meter socket and panel, belongs to the property owner and is repaired by a qualified electrical contractor. Our guide to utility meter and service responsibilities describes this in detail.

Before anything else, check for danger. Fire, smoke, sparks, a burning smell or a downed line is an emergency. Keep away and call 911 and the utility.

First checks you can safely make

Start with a calm look at the situation. Are all the lights out, or only some areas? If only part of the house is without power, you have a different problem, and our page on half the house with no power will help. This page assumes the entire house is dark.

Confirm that neighbors truly have power. Lights on in a house can come from a generator or from another circuit. A quick look at streetlights and a neighbor's house usually settles it. Ask them if they have any flickering or brief interruptions that might have preceded your outage.

Check your utility's outage map or app if you have a working phone. Sometimes a localized outage affecting a handful of customers is already reported. If your address appears, crews know. If it does not, report it. A report on a single-house outage is valuable because the utility cannot see it automatically in many cases.

Look at the main breaker. Open the panel door only, the exterior door, and do not remove the inner cover. Check whether the main breaker is in the off or tripped position. A main breaker that has tripped may indicate an overload or fault inside. A main breaker that is still on while the house is dark suggests the supply is not reaching the panel.

Notice whether any equipment is wet. After rain or flooding, water can cause faults. If the panel or meter area is wet, do not touch anything, and keep clear. Our page on water in an electrical panel explains what that means.

Avoid resetting a main breaker more than once. If it trips again, something is wrong inside the house, and repeated resetting risks damage. Do not open the meter, and do not touch the service cable or mast.

The main breaker tripped: what that suggests

If the main breaker is tripped, the house lost power because the breaker opened, not because the utility stopped delivering. The main is the largest breaker in the panel, and it protects the service conductors and the panel itself.

A main can trip from a large overload, from a short circuit that downstream breakers failed to clear or from a ground fault. It is less common than a branch breaker tripping, so when it happens it deserves respect. Possible triggers include a major appliance failure, a lightning surge, water in the panel, a failing breaker or a loose connection that is arcing.

If you are comfortable doing so safely, turn off all the branch breakers first, then reset the main. If the main holds, turn on the branch breakers one at a time and watch. If the main trips as soon as a particular branch is turned on, the problem is on that circuit. If it trips with all branches off, the problem is in the panel or the service itself, and you should leave it off and call.

Do not do this if the panel is wet, if there are signs of burning, if the breaker feels hot or if you hear buzzing or crackling. In those cases, step back and call.

A main breaker can also fail on its own. Old or damaged breakers can refuse to stay on or can overheat. Our page on circuit breaker repair explains how breakers are tested and replaced, and electrical panel repair covers the panel itself.

If the main is on but the house remains dark, and you can see nothing wrong, the issue is upstream: the meter, the service conductors or the utility supply.

Meter and service equipment problems

The meter socket is the box on the outside wall where the utility meter plugs in. Its internal contacts clamp the meter blades and pass power to the house. These contacts can burn, corrode or loosen. A damaged socket can cause intermittent power, burning smells, melted plastic around the meter or an outright outage.

Signs of a meter-side problem include a discolored or melted meter base, a meter that appears crooked or partly pulled from the wall, water around the meter, a hissing or buzzing sound, a burning smell or visible arc marks. Any of these means keep away. The meter area carries full service voltage and cannot be switched off from inside the house.

The service mast and weatherhead, where the overhead service cable enters the conduit, are also potential trouble spots. Wind, falling branches or corrosion can loosen them or pull the cable. Our page on service mast and weatherhead repair describes that work.

Repairing a meter socket generally requires coordination with the utility. The utility removes the meter or disconnects the service so that the electrical contractor can work safely, then restores service after the repair passes any required inspection. Do not remove a meter yourself or break its seal. Doing so is unsafe and may be prohibited.

If you suspect a meter problem, call both your electrical contractor and the utility. The utility can tell you whether there is a problem on their side and whether they need to disconnect the service. For related information on damaged equipment, see meter box damaged or hanging and meter socket replacement.

Service drop and underground service faults

Between the utility's equipment and your meter runs the service. In many South Florida neighborhoods, this is an overhead service drop from a pole, attached to your mast. In others, particularly newer developments, it is an underground lateral running from a pad-mounted transformer.

Overhead service drops can fail where they attach to the house or pole, where insulation has been chafed by branches or where connectors have corroded. Wind and storms can pull a drop loose. A drop that has fallen, sags low or lies across a fence or roof is dangerous and should be reported to the utility immediately. Keep everyone away from it and treat it as energized.

Underground laterals can fail when insulation breaks down, when roots or digging damage the cable or when water gets in. Faults may be intermittent at first, with power returning and failing, then become permanent. These faults often show up as a single-house outage, since each lateral serves one or a few properties.

Who repairs what depends on ownership of the conductors. Utilities generally repair their lines up to the property boundary or meter. In some arrangements, especially for older underground services or detached structures, the property owner is responsible for a portion. A utility representative can tell you where the line of responsibility lies for your address.

A single-property outage with a visibly undamaged house and a working main breaker often points to a service fault on the utility side. A report to the utility with the address and a description of what you see is the right step.

Do not dig, cut or tamper with underground service lines. Call the utility. If you are planning excavation, call the proper locating service before digging.

Other inside causes that look like an outage

Occasionally, a house that seems entirely dark has a more limited problem. A few possibilities are worth ruling out.

A tripped main in a subpanel or a separate disconnect can cut power to a portion of the house, such as a garage, apartment or pool area. If you have a separate disconnect or a second panel, check it.

A failed ground fault protection device or a tripped breaker upstream of other outlets can make an entire area look dead. In many homes, one GFCI outlet protects several others. Our page on GFCI that will not reset explains that.

A loose or failed neutral can cause strange behavior: some lights dim or fail while others are bright, with equipment misbehaving. In extreme cases the house may appear to lose power in parts. Our page on power flickering after a storm discusses neutral problems.

A whole-house surge or lightning event can damage the main breaker or panel parts. After a lightning strike, a house may lose power while neighbors keep it, particularly if the surge entered through a single service. See lightning strike electrical damage.

A generator transfer switch or interlock misconfigured after an earlier outage can prevent utility power from reaching the house. If you use backup equipment, check that the transfer equipment is in the utility position. Our page on generator transfer equipment describes the equipment.

Finally, some utilities disconnect service for reasons unrelated to equipment, such as account issues or safety shutoffs after an inspection. If you have received notices, check your account before assuming a fault.

Who to call and in what order

The right order of calls saves time and keeps you safe. Here is a sensible sequence.

If there is fire, smoke, sparks, a person in danger or a downed line touching something, call 911 first. Keep away from the hazard and keep others away.

If the cause appears to be outside your equipment, such as a downed or sagging service drop, a failed transformer or a problem upstream of the meter, call the utility. Give your address, describe what you see and say that only your property is affected.

If the main breaker has tripped and will not reset, if the panel or meter is damaged, wet or burned, or if you suspect a problem on the house side of the meter, call a qualified electrician. If the meter socket or service mast needs work, the electrician will coordinate with the utility.

If you are not sure whose problem it is, call us and describe what you have observed. We can talk through whether it sounds like a utility matter or something on your side, and we will be honest about it. We do not promise that a technician is available at every hour or place, but we will explain what we can do and how the visit works before anyone is sent.

While waiting, protect your household. Turn off or unplug sensitive electronics, since power may return with surges. Keep refrigerators and freezers closed. If you use medical equipment that depends on power, activate your backup plan, and call emergency services if anyone's health is at risk. Our power outage preparedness plan can help you prepare ahead.

What a technician checks when the problem is on your side

When a technician is called for a single-property outage, the visit follows the path of the power. It starts at the meter and service equipment, visually inspecting for damage, heat, corrosion and water. Where safe and appropriate, voltage is measured at the meter socket and the service entrance conductors.

If power is present at the line side of the main breaker but the house is dark, the main breaker or the panel is suspect. The technician tests the breaker and checks the bus connections, looking for burnt contacts, loose lugs and signs of arcing. Replacing a failed main breaker is a common repair.

If power is absent at the meter, the problem is upstream. The technician documents it and works with the utility. The utility may need to restore their equipment before further work can proceed.

If the main trips on reset, the technician isolates circuits one at a time, testing for shorts and ground faults. Damaged branch wiring, failed appliances and wet equipment are common findings. Our power loss troubleshooting service is built around this methodical process.

Throughout, the technician explains what is found, what is safe to repair on the spot and what requires permits, inspections or utility coordination. Complicated jobs need an on-site visit before a quote, and quotes are given only by phone. A service call charge applies and is explained before dispatch.

Reducing the chance of a repeat and what to have ready

Some single-property outages cannot be prevented, but exposure can be reduced. Keep trees trimmed away from service drops, with the utility handling trimming near their lines. Make sure the mast, weatherhead and meter socket are secure and clear of corrosion, particularly in coastal areas. Replace aging panels and breakers rather than waiting for failure, and install surge protection to limit damage from storm events.

Know your panel. A labeled panel and a clear idea of where the main breaker is make any outage easier to handle. Keep the area around the panel and meter clear and accessible.

When you call, have details ready. Tell us whether the entire house is dark, whether neighbors have power, what the main breaker looks like, whether anything is wet or damaged at the meter or panel, whether there was a storm, flicker or surge beforehand and whether you have already contacted the utility. Note any smells, sounds or visible damage. Photos taken from a safe distance help.

If you can do so without risk, tell us about your equipment: whether the service is overhead or underground, the age of the panel and whether you have a generator or transfer equipment. And if the situation involves anything dangerous, move away and call 911 first. When you are ready, call, and we will explain the service call charge and the process before anyone is dispatched.

Questions people ask

Why would only my house lose power?

Each house has its own connection to the network: a service drop or underground lateral, a meter, a main breaker and a panel. A failure on any of these affects only your property. It can be on the utility side, such as the service line, or on your side, such as the meter socket or main breaker.

Should I call the utility or an electrician first?

If you see a downed or sagging line, or the problem seems to be upstream of your meter, call the utility. If the main breaker will not reset, or the meter socket, mast or panel is damaged, call an electrician. If unsure, describe what you see to us and we will help you figure out the right call.

Is it safe to reset the main breaker?

A single reset is reasonable if the panel is dry, there is no burning smell and the breaker is not hot. If it trips again, stop. Repeated resetting can cause damage and hide a serious fault. A technician should test the circuits and the panel before the main is turned back on.

Can I check the meter myself?

You can look at it from a distance for damage, water or discoloration, but do not open it, remove it or touch the cable and mast. The meter area carries full service voltage and cannot be switched off from inside. Any visible damage should be reported to the utility and an electrician.

Who pays for repairs to the line feeding my house?

Responsibility depends on where the utility's equipment ends and yours begins, which varies by property and arrangement. The utility can tell you where the boundary lies for your address. We can help you understand which parts, such as the mast and meter socket, are usually the property owner's responsibility.

How are quotes handled for repairs?

Quotes are given only by phone. Complicated service or panel problems need an on-site visit before a quote can be provided. A service call charge applies and is explained on the phone before dispatch. Call, describe what you have observed and we will walk you through the steps.

Talk to 24 Hour Electrician Near Me

If "Your Neighbors Have Power and You Do Not" sounds like your problem, call and describe what you see, hear or smell at the panel, the outlet or the fixture. We explain what the work involves, and some jobs need a visit before a quote.

Related pages

  • Meter Responsibilities: Where utility equipment ends and the property owner's equipment begins at the electric meter, and who repairs what when something is damaged.
  • Power Loss Troubleshooting: Private South Florida guide for routing complete outages, partial power loss, flickers and property-side electrical problems.
  • Half the House Dark: When half of a house loses power while other lights run dim or bright, the cause is often a lost leg or loose neutral. Learn what to do and why.
  • Utility vs Home: How to tell a utility outage from a fault at your own property, with simple safe checks to run before anyone is called and what each result means.
  • Flickering Lights: Why house lights flicker: separating bulb, switch, circuit and utility service causes, and which flicker patterns call for an electrician right away.
  • Damaged Meter Box: A meter box knocked loose by a vehicle, storm or rust is a hazard. Learn what to avoid, who handles which side, and what an electrician checks.

Talk through the electrical service you need.

Request service

Related pages

Call (754) 226-1874